Schneider Electric LDL34400WU31X Molded Case Circuit Breaker 480V 400A

(No reviews yet) Write a Review
SKU:
LDL34400WU31X
UPC:
3606486283776
Condition:
New
Electrical Connection:
lugs, line || lugs, load
Network Frequency:
50/60 Hz
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range:
PowerPact
Product Name:
PowerPact L
Utilisation Category:
category A
[Ue] Rated Operational Voltage:
480/277 V AC 50/60 Hz IEC 60947-3
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Sustainable Offer Status:
Green Premium product
Wire Stripping Length:
31 mm || 61 mm
Pollution Degree:
3 IEC 60947-1
Trip Unit Name:
MicroLogic 3.3
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Height:
340 mm
Communication Interface:
Modbus || Ethernet
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Circularity Profile:
ENVEOLI2206029EN
Color:
Black
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Circuit Breaker Application:
HACR rated
Net Weight:
6.2 kg
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Mounting Mode:
unit mount lug)
Control Type:
toggle
Eu Rohs Directive:
Compliant with Exemptions
Device Short Name:
L-Frame
Suitability For Isolation:
yes IEC 60947-2
Depth:
110 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Width:
140 mm
Terminal Identifier:
AL600LS52K3
Product Certifications:
UL || CSA || NOM
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ip Degree Of Protection:
front cover IP40
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz UL 489 || 14 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Protection Technology:
current limiter
Poles Description:
3P
Product Or Component Type:
circuit breaker
Breaking Capacity Code:
D
Continuous Current Rating:
0.8
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Pvc Free:
Yes
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Support:
lug
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Line Rated Current:
400-400 A
Ambient Air Temperature For Storage:
-50-85 °C
Environmental Disclosure:
ENVPEP2206029EN
Device Application:
distribution
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Brochure:
View
Catalog:
View
Datasheet:
View
$5,696.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 18kA at 480VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 80%. This breaker is a PowerPact Mission Critical; it analyzes fault current to make decisions which maximize selectivity with downstream circuit breakers. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose