Schneider Electric LGF36250U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LGF36250U31X
UPC:
3606486284230
Condition:
New
Mercury Free:
Yes
Depth:
110 mm
Utilisation Category:
category A
Product Certifications:
UL || CSA || NOM
Protection Technology:
current limiter
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Trip Unit Name:
MicroLogic 3.3
Tightening Torque:
50-50 N.m 35-300 mm² (AWG 2...600 kcmil) || 50-50 N.m 35-240 mm² (AWG 2...500 kcmil)
Network Frequency:
50/60 Hz
Mounting Mode:
unit mount busbar)
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Device Short Name:
L-Frame
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Storage:
-50-85 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Product Or Component Type:
circuit breaker
Width:
140 mm
Breaking Capacity Code:
G
Device Application:
distribution
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Name:
PowerPact L
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Height:
340 mm
Suitability For Isolation:
yes IEC 60947-2
Rohs Exemption Information:
Yes
Net Weight:
6.2 kg
Circularity Profile:
ENVEOLI2206029EN
Circuit Breaker Application:
HACR rated
Control Type:
toggle
Electrical Connection:
busbar connection, line || busbar connection, load
Pvc Free:
Yes
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Poles Description:
3P
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Awg Gauge:
AWG 2...600 kcmil copper || AWG 2...500 kcmil aluminium
Ip Degree Of Protection:
front cover IP40
Warranty:
18 months
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Pollution Degree:
3 IEC 60947-1
Continuous Current Rating:
0.8
Line Rated Current:
250-250 A
Environmental Disclosure:
ENVPEP2206029EN
Wire Stripping Length:
31 mm
Terminal Identifier:
AL400L61K3
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Eu Rohs Directive:
Compliant with Exemptions
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Range:
PowerPact
Ambient Air Temperature For Operation:
-2-70 °C
Color:
Black
Mounting Support:
busbar
Communication Interface:
Modbus || Ethernet
  • Schneider Electric LGF36250U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGF36250U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGF36250U31X Molded Case Circuit Breaker 600V 400A
$5,081.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 250A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has a busbar connection. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose