Schneider Electric LGL36250U33X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LGL36250U33X
UPC:
785901494706
Condition:
New
Sustainable Offer Status:
Green Premium product
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Net Weight:
6.2 kg
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Circuit Breaker Application:
HACR rated
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Mode:
unit mount lug)
Pollution Degree:
3 IEC 60947-1
Communication Interface:
Modbus || Ethernet
Device Short Name:
L-Frame
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Tightening Torque:
50-50 N.m 35-300 mm² (AWG 2...600 kcmil) || 50-50 N.m 35-240 mm² (AWG 2...500 kcmil)
Trip Unit Technology:
electronic, standard, MicroLogic 3.3 S, LSI
Depth:
110 mm
Control Type:
toggle
Wire Stripping Length:
31 mm
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Current Rating:
0.8
Utilisation Category:
category A
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Mounting Support:
lug
Awg Gauge:
AWG 2...600 kcmil copper || AWG 2...500 kcmil aluminium
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Electrical Connection:
lugs, line || lugs, load
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Product Or Component Type:
circuit breaker
Trip Unit Name:
MicroLogic 3.3 S
Eu Rohs Directive:
Compliant with Exemptions
Long Time Pick-Up Adjustment Range:
0.25...1 x In
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Product Certifications:
UL || CSA || NOM
Ambient Air Temperature For Storage:
-50-85 °C
Device Application:
distribution
Suitability For Isolation:
yes IEC 60947-2
Breaking Capacity Code:
G
Range:
PowerPact
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Network Frequency:
50/60 Hz
Terminal Identifier:
AL400L61K3
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Circularity Profile:
ENVEOLI2206029EN
Ip Degree Of Protection:
front cover IP40
Color:
Black
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Width:
140 mm
Poles Description:
3P
Environmental Disclosure:
ENVPEP2206029EN
Height:
340 mm
Line Rated Current:
250-250 A
Pvc Free:
Yes
Product Name:
PowerPact L
$5,674.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 250A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3S trip unit and an LSI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose