Schneider Electric LGM36400U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LGM36400U31X
UPC:
785901954736
Condition:
New
Line Rated Current:
400-400 A
Height:
340 mm
Ip Degree Of Protection:
front cover IP40
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Device Short Name:
L-Frame
Rohs Exemption Information:
Yes
Range:
PowerPact
Ambient Air Temperature For Operation:
-2-70 °C
Net Weight:
6.2 kg
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Network Frequency:
50/60 Hz
Poles Description:
3P
Width:
140 mm
Wire Stripping Length:
31 mm || 61 mm
Ambient Air Temperature For Storage:
-50-85 °C
Breaking Capacity Code:
G
Mounting Mode:
unit mount lug)
Circuit Breaker Application:
HACR rated
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Eu Rohs Directive:
Compliant with Exemptions
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Protection Technology:
current limiter
Environmental Disclosure:
ENVPEP2206029EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Mercury Free:
Yes
Product Certifications:
UL || CSA || NOM
Trip Unit Name:
MicroLogic 3.3
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Electrical Connection:
lugs, line || terminal nut, load
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Control Type:
toggle
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Warranty:
18 months
Suitability For Isolation:
yes IEC 60947-2
Utilisation Category:
category A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Continuous Current Rating:
0.8
Color:
Black
Depth:
110 mm
Terminal Identifier:
AL600LS52K3
Product Name:
PowerPact L
Mounting Support:
lug
Device Application:
distribution
Pvc Free:
Yes
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Or Component Type:
circuit breaker
Communication Interface:
Modbus || Ethernet
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Circularity Profile:
ENVEOLI2206029EN
Sustainable Offer Status:
Green Premium product
Pollution Degree:
3 IEC 60947-1
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric LGM36400U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGM36400U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LGM36400U31X Molded Case Circuit Breaker 600V 400A
$5,081.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has lugs on the line side and terminal nuts on the load side. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose