Schneider Electric

Schneider Electric LGP36400U33X Molded Case Circuit Breaker 600V 600A

(No reviews yet) Write a Review
SKU:
LGP36400U33X
UPC:
785901954750
Condition:
New
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mercury Free:
Yes
Suitability For Isolation:
yes IEC 60947-2
Width:
140 mm
Ambient Air Temperature For Storage:
-50-85 °C
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Mounting Support:
lug
Range:
PowerPact
Height:
340 mm
Depth:
110 mm
Circuit Breaker Application:
HACR rated
Network Frequency:
50/60 Hz
Warranty:
18 months
Product Or Component Type:
circuit breaker
Continuous Current Rating:
0.8
Pvc Free:
Yes
Breaking Capacity Code:
G
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Color:
Black
Circularity Profile:
ENVEOLI2206029EN
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Trip Unit Name:
MicroLogic 3.3 S
Device Short Name:
L-Frame
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Poles Description:
3P
Ip Degree Of Protection:
front cover IP40
Net Weight:
6.2 kg
Terminal Identifier:
AL600LS52K3
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Product Name:
PowerPact L
Communication Interface:
Modbus || Ethernet
Environmental Disclosure:
ENVPEP2206029EN
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Line Rated Current:
400-400 A
Mounting Mode:
unit mount lug)
Control Type:
toggle
Wire Stripping Length:
31 mm || 61 mm
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Long Time Pick-Up Adjustment Range:
0.25...1 x In
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Ambient Air Temperature For Operation:
-2-70 °C
Electrical Connection:
terminal nut, line || lugs, load
Rohs Exemption Information:
Yes
Trip Unit Technology:
electronic, standard, MicroLogic 3.3 S, LSI
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Pollution Degree:
3 IEC 60947-1
Product Certifications:
UL || CSA || NOM
Eu Rohs Directive:
Compliant with Exemptions
Device Application:
distribution
Utilisation Category:
category A
Brochure:
View
Catalog:
View
Datasheet:
View
$5,674.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3S trip unit and an LSI function. This unit has terminal nuts on the line side and lugs on the load side. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose