Schneider Electric LJA36250U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJA36250U31X
UPC:
785901234579
Condition:
New
Pollution Degree:
3 IEC 60947-1
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Awg Gauge:
AWG 2...600 kcmil copper || AWG 2...500 kcmil aluminium
Tightening Torque:
50-50 N.m 35-300 mm² (AWG 2...600 kcmil) || 50-50 N.m 35-240 mm² (AWG 2...500 kcmil)
Mercury Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Poles Description:
3P
Terminal Identifier:
AL400L61K3
Wire Stripping Length:
31 mm
Network Frequency:
50/60 Hz
Eu Rohs Directive:
Compliant with Exemptions
Product Or Component Type:
circuit breaker
Height:
340 mm
Continuous Current Rating:
0.8
Mounting Mode:
I-Line bracket)
Line Rated Current:
250-250 A
Warranty:
18 months
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Electrical Connection:
I-Line connection, line || lugs, load
Ambient Air Temperature For Storage:
-50-85 °C
Mounting Support:
bracket
Pvc Free:
Yes
Width:
140 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Certifications:
UL || CSA || NOM
Range:
PowerPact
Sustainable Offer Status:
Green Premium product
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Breaking Capacity Code:
J
Phase Connection:
ABC
Communication Interface:
Modbus || Ethernet
Utilisation Category:
category A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Device Application:
distribution
Color:
Black
Circularity Profile:
ENVEOLI2206029EN
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Trip Unit Name:
MicroLogic 3.3
Circuit Breaker Application:
HACR rated
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Environmental Disclosure:
ENVPEP2206029EN
Ambient Air Temperature For Operation:
-2-70 °C
Depth:
110 mm
Suitability For Isolation:
yes IEC 60947-2
Long Time Pick-Up Adjustment Range:
0.25...1 x In
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Product Name:
PowerPact L
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Control Type:
toggle
Net Weight:
6.2 kg
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Ip Degree Of Protection:
front cover IP40
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Mounting Height:
6 in
Rohs Exemption Information:
Yes
Device Short Name:
L-Frame
  • Schneider Electric LJA36250U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36250U31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36250U31X Molded Case Circuit Breaker 600V 400A
$8,773.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 250A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose