Schneider Electric LJA36250U33X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJA36250U33X
UPC:
785901007906
Condition:
New
Depth:
110 mm
Mounting Mode:
I-Line bracket)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Circularity Profile:
ENVEOLI2206029EN
Poles Description:
3P
Wire Stripping Length:
31 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Mounting Height:
6 in
Continuous Current Rating:
0.8
Control Type:
toggle
Pollution Degree:
3 IEC 60947-1
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Utilisation Category:
category A
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Pvc Free:
Yes
Product Or Component Type:
circuit breaker
Suitability For Isolation:
yes IEC 60947-2
Electrical Connection:
I-Line connection, line || lugs, load
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Width:
140 mm
Product Certifications:
UL || CSA || NOM
Ambient Air Temperature For Storage:
-50-85 °C
Sustainable Offer Status:
Green Premium product
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Trip Unit Technology:
electronic, standard, MicroLogic 3.3 S, LSI
Environmental Disclosure:
ENVPEP2206029EN
Product Name:
PowerPact L
Color:
Black
Breaking Capacity Code:
J
Tightening Torque:
50-50 N.m 35-300 mm² (AWG 2...600 kcmil) || 50-50 N.m 35-240 mm² (AWG 2...500 kcmil)
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Eu Rohs Directive:
Compliant with Exemptions
Device Application:
distribution
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Awg Gauge:
AWG 2...600 kcmil copper || AWG 2...500 kcmil aluminium
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Phase Connection:
ABC
Trip Unit Name:
MicroLogic 3.3 S
Circuit Breaker Application:
HACR rated
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Network Frequency:
50/60 Hz
Height:
340 mm
Rohs Exemption Information:
Yes
Communication Interface:
Modbus || Ethernet
Ip Degree Of Protection:
front cover IP40
Line Rated Current:
250-250 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mounting Support:
bracket
Ambient Air Temperature For Operation:
-2-70 °C
Terminal Identifier:
AL400L61K3
Range:
PowerPact
Warranty:
18 months
Mercury Free:
Yes
Net Weight:
6.2 kg
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Device Short Name:
L-Frame
Brochure:
View
Catalog:
View
Datasheet:
View
$9,366.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 250A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3S trip unit and an LSI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose