Schneider Electric LJA36600U31XYP Circuit Breaker Frame Only 600V 250A

(No reviews yet) Write a Review
SKU:
LJA36600U31XYP
UPC:
785901194774
Condition:
New
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Utilisation Category:
category A
Circuit Breaker Application:
HACR rated
Product Or Component Type:
circuit breaker
Suitability For Isolation:
yes IEC 60947-2
Ip Degree Of Protection:
front cover IP40
Trip Unit Name:
MicroLogic 3.3
Protection Technology:
current limiter
Continuous Current Rating:
0.8
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Rohs Exemption Information:
Yes
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Communication Interface:
Modbus || Ethernet
Phase Connection:
ABC
Width:
140 mm
Mounting Mode:
I-Line bracket)
Circularity Profile:
ENVEOLI2206029EN
Breaking Capacity Code:
J
Color:
Black
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
bracket
Range:
PowerPact
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Control Type:
toggle
Height:
340 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Accessory / Separate Part Type:
padlocking handle ON and OFF end
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Product Certifications:
UL || CSA || NOM
Eu Rohs Directive:
Compliant with Exemptions
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Poles Description:
3P
Tightening Torque:
50-50 N.m 70-240 mm² (2 x AWG 2/0...500 kcmil)
Device Short Name:
L-Frame
Environmental Disclosure:
ENVPEP2206029EN
Ambient Air Temperature For Operation:
-2-70 °C
Net Weight:
6.2 kg
Mounting Height:
6 in
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Wire Stripping Length:
31 mm
Line Rated Current:
600-600 A
Warranty:
18 months
Product Name:
PowerPact L
Network Frequency:
50/60 Hz
Pvc Free:
Yes
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mercury Free:
Yes
Pollution Degree:
3 IEC 60947-1
Terminal Identifier:
AL600LF52K3
Sustainable Offer Status:
Green Premium product
Depth:
110 mm
Electrical Connection:
I-Line connection, line || lugs, load
Ambient Air Temperature For Storage:
-50-85 °C
Device Application:
distribution
Brochure:
View
Catalog:
View
Datasheet:
View
$10,958.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. This unit includes a factory installed padlock handle.
View AllClose