Schneider Electric LJP36600U31XSA Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJP36600U31XSA
UPC:
3606486284612
Condition:
New
Terminal Identifier:
AL600LS52K3
Wire Stripping Length:
31 mm || 61 mm
Product Name:
PowerPact L
Device Short Name:
L-Frame
Continuous Current Rating:
0.8
Accessory / Separate Part Type:
shunt trip cover frame
Mounting Mode:
unit mount lug)
Network Frequency:
50/60 Hz
Width:
140 mm
Color:
Black
Pollution Degree:
3 IEC 60947-1
Protection Technology:
current limiter
Trip Unit Name:
MicroLogic 3.3
Mounting Support:
lug
Ip Degree Of Protection:
front cover IP40
Breaking Capacity Code:
J
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP2206029EN
Mercury Free:
Yes
Device Application:
distribution
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Height:
340 mm
Product Certifications:
UL || CSA || NOM
Product Or Component Type:
circuit breaker
Circularity Profile:
ENVEOLI2206029EN
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Range:
PowerPact
Pvc Free:
Yes
Depth:
110 mm
Ambient Air Temperature For Operation:
-2-70 °C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Line Rated Current:
600-600 A
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Electrical Connection:
terminal nut, line || lugs, load
Suitability For Isolation:
yes IEC 60947-2
Warranty:
18 months
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Utilisation Category:
category A
Long Time Pick-Up Adjustment Range:
0.25...1 x In
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Sustainable Offer Status:
Green Premium product
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Control Type:
toggle
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Communication Interface:
Modbus || Ethernet
Circuit Breaker Application:
HACR rated
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Eu Rohs Directive:
Compliant with Exemptions
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Poles Description:
3P
Ambient Air Temperature For Storage:
-50-85 °C
Net Weight:
6.2 kg
Brochure:
View
Catalog:
View
Datasheet:
View
$11,258.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has terminal nuts on the line side and lugs on the load side. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. This unit includes a factory installed 120VAC shunt trip.
View AllClose