Schneider Electric LRA36600U31X Molded Case Circuit Breaker 600V 600A

(No reviews yet) Write a Review
SKU:
LRA36600U31X
UPC:
3606486283912
Condition:
New
Mounting Height:
6 in
Net Weight:
6.2 kg
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Device Application:
distribution
Mercury Free:
Yes
Communication Interface:
Modbus || Ethernet
Network Frequency:
50/60 Hz
Phase Connection:
ABC
Pvc Free:
Yes
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Terminal Identifier:
AL600LF52K3
Product Certifications:
UL || CSA || NOM
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
Wire Stripping Length:
31 mm
Height:
340 mm
Tightening Torque:
50-50 N.m 70-240 mm² (2 x AWG 2/0...500 kcmil)
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Eu Rohs Directive:
Compliant with Exemptions
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Product Or Component Type:
circuit breaker
Control Type:
toggle
Breaking Capacity Code:
R
Circuit Breaker Application:
HACR rated
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Mounting Mode:
I-Line bracket)
Range:
PowerPact
Suitability For Isolation:
yes IEC 60947-2
Warranty:
18 months
Depth:
110 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Trip Unit Name:
MicroLogic 3.3
Environmental Disclosure:
ENVPEP2206029EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Protection Technology:
current limiter
Utilisation Category:
category A
Circularity Profile:
ENVEOLI2206029EN
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
Poles Description:
3P
Ambient Air Temperature For Storage:
-50-85 °C
Pollution Degree:
3 IEC 60947-1
Color:
Black
Width:
140 mm
Sustainable Offer Status:
Green Premium product
Line Rated Current:
600-600 A
Rohs Exemption Information:
Yes
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Product Name:
PowerPact L
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Device Short Name:
L-Frame
Continuous Current Rating:
0.8
Electrical Connection:
I-Line connection, line || lugs, load
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Support:
bracket
Ip Degree Of Protection:
front cover IP40
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
$13,952.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 100kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose