Schneider Electric LXM28AU07M3X Lexium28 Can Io Drive 1/3Ph 230V 750W
Schneider Electric
$822.71
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LXM28AU07M3X Lexium28 Can Io Drive 1/3Ph 230V 750W
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 13.5A at 220V, a power of 750W/1HP and a continuous power of 750W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for CANopen, CANmotion integrated communication interfaces. Physical interface is RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 1 motor stacks) at 500W, servo motor BCH2 (80mm, 2 motor stacks) at 750W and servo motor BCH2 (130mm, 1 motor stacks) at 600W. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
- Output Current 3S Peak:
- 13.5 A 220 V
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Discrete Output Voltage:
- 12...24 V DC
- Supply Frequency:
- 50/60 Hz - 5...5 %
- Communication Interface:
- CANopen, Integrated || CANmotion, Integrated
- Continuous Power:
- 750 W 220 V
- Switching Frequency:
- 16 kHz
- Reach Free Of Svhc:
- Yes
- Discrete Input Voltage:
- 24 V DC logic
- Product Or Component Type:
- motion servo drive
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Pvc Free:
- Yes
- Product Compatibility:
- servo motor BCH2 130 mm, 1 500 W || servo motor BCH2 80 mm, 2 750 W || servo motor BCH2 130 mm, 1 600 W
- Status Led:
- 1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
- Operating Position:
- vertical
- Format Of The Drive:
- compact housing
- Analogue Input Type:
- V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
- Output Current 3S Peak 3:
- 13.5 A 220 V
- Device Short Name:
- LXM28A
- Ambient Air Temperature For Operation:
- 0-55 °C
- Electrical Isolation:
- between power and control
- Height:
- 150 mm
- Rohs Exemption Information:
- Yes
- Absolute Accuracy Error:
- 0.001
- Line Current:
- 6 A 181.8 % 220 V, single phase || 6 A 160.6 % 220 V, three phase
- Mercury Free:
- Yes
- [Us] Rated Supply Voltage:
- 200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
- Analogue Input Number:
- 2
- Relative Humidity:
- 5-95 % without condensation
- Sustainable Offer Status:
- Green Premium product
- Signalling Function:
- servo status and fault codes five 7-segment display units
- Type Of Cable:
- shielded motor cable 0-55 °C) copper
- Discrete Input Logic:
- positive or negative CN1)
- Range Of Product:
- Lexium 28
- Maximum Leakage Current:
- 1.3 mA
- Phase:
- single phase || three phase
- Vibration Resistance:
- 3M4 3 mm 9-200 Hz)IEC 60721-3-3
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
- Discrete Output Number:
- 5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
- Electrical Connection:
- spring terminal 0.82...1 mm², AWG 18 L1-L2) || spring terminal 0.82...1 mm², AWG 18 R, S, T) || spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) || spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
- Method Of Access:
- slave
- Discrete Output Logic:
- positive or negative CN1)
- Emc Filter:
- without EMC filter
- Ip Degree Of Protection:
- IP20
- Nominal Power:
- 0.75 kW 220 V 16 kHz
- Control Signal Type:
- servo motor encoder feedback CN2
- Ambient Air Temperature For Storage:
- -25-65 °C
- Output Voltage:
- <= power supply voltage
- Net Weight:
- 1 kg
- Circularity Profile:
- ENVEOLI1409001EN
- Standards:
- IEC 61800-5-1
- Output Current 3S Peak 2:
- 13.5 A 220 V
- Number Of Addresses:
- 1-127 CANopen, CANmotion
- Environmental Disclosure:
- ENVPEP1409001EN
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Marking:
- CSA || cULus || CE
- Supply Voltage Limits:
- 200-255 V three phase || 170-255 V single phase
- Physical Interface:
- RS485 Modbus Serial line slave
- Product Certifications:
- CE || cULus || CSA
- Transmission Rate:
- 250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
- Protection Type:
- against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
- Overvoltage Category:
- III
- Network Frequency:
- 47.5...63 Hz
- Discrete Input Number:
- 8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
- Depth:
- 146 mm
- Safety Level:
- SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
- Continuous Output Current:
- 4.5 A 16 kHz
- Electromagnetic Compatibility:
- conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
- China Rohs Regulation:
- X
- Width:
- 55 mm
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Connector Type:
- RJ45 CN4)CANopen, CANmotion
- Type Of Cooling:
- integrated fan
- Safety Function:
- STO (safe torque off), Integrated
- Shock Resistance:
- 10 gn, type I IEC 60721-3-3
- Catalog:
- View
- Datasheet:
- View
