Schneider Electric LXM32MC10N4 Lxm32 Modular 100A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32MC10N4
UPC:
3.60649E+12
Condition:
New
Discrete Output Number:
3
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Electrical Isolation:
between power and control
Supply Voltage Limits:
323-528 V
Device Short Name:
LXM32M
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Line Current:
23.3 A 140 % 480 V, without line choke || 32 A 54 % 480 V, with external line choke 0.5 mH || 38.1 A 70 % 480 V, with external line choke 0.5 mH
Control Signal Type:
pulse train output (PTO) RS422 <500 kHz <100 m
Product Or Component Type:
motion servo drive
Tightening Torque:
CN8 3.8-3.8 N.m
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Product Certifications:
CSA
Environmental Disclosure:
ENVPEP110705EN
Net Weight:
9.6 kg
Sampling Duration:
0.25 ms
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Response Time On Output:
250 µs DO)discrete
Communication Interface:
Modbus, Integrated || Profinet, with separated communication card
Type Of Cooling:
integrated fan
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Overvoltage Category:
III
Standards:
EN/IEC 61800-3
Rohs Exemption Information:
Yes
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Height:
385 mm
Network Frequency:
47.5...63 Hz
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Ip Degree Of Protection:
IP20 EN/IEC 60529
Pvc Free:
Yes
Output Voltage:
<= power supply voltage
Discrete Output Voltage:
<= 30 V DC
Product Compatibility:
servo motor BMH 190 mm, 1 || servo motor BMH 190 mm, 2 || servo motor BMH 190 mm, 3 || servo motor BMH 190 mm, 4
Phase:
three phase
Safety Level:
SIL 3 EN/IEC 61508
Operating Position:
vertical +/- 10 degree
Nominal Power:
11 kW 400 V 4 kHz || 11 kW 480 V 8 kHz
Warranty:
18 months
Discrete Input Type:
capture CAP
Continuous Output Current:
40 A 4 kHz
Mercury Free:
Yes
Format Of The Drive:
book
Switching Frequency:
4 kHz
Emc Filter:
integrated
Discrete Output Type:
logic DO)24 V DC
Discrete Input Voltage:
24 V DC capture
Connector Type:
RJ45 (labelled CN7) Modbus
Physical Interface:
2-wire RS485 multidrop Modbus
Width:
180 mm
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Ambient Air Temperature For Operation:
0-50 °C UL
Safety Function:
STO (safe torque off), Integrated
Depth:
240 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pollution Degree:
2 EN/IEC 61800-5-1
Continuous Power:
11000 W 400 V || 11000 W 480 V
Braking Current:
50 mA
Status Led:
1 LED (Red) servo drive voltage
Output Current 3S Peak:
100 A 480 V 5 s
Range Of Product:
Lexium 32
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Signalling Function:
display of faults 7 segments
Marking:
CE
Sustainable Offer Status:
Green Premium product
Electrical Connection:
terminal 8 mm², AWG 8 CN8)
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011
Ambient Air Temperature For Storage:
-25-70 °C
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Protection Type:
against reverse polarity inputs signal
Supply Frequency:
50/60 Hz - 5...5 %
Discrete Input Number:
2 capture
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Number Of Addresses:
1-247 Modbus
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
ENVEOLI110605EN
Maximum Leakage Current:
30 mA
Datasheet:
View
  • Schneider Electric LXM32MC10N4 Lxm32 Modular 100A Rms Peak 3Ph 480V
  • Schneider Electric LXM32MC10N4 Lxm32 Modular 100A Rms Peak 3Ph 480V
$3,431.10

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 40A at 4kHz and a continuous power of 11000W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 180mm (Width) x 240mm (Depth) x 385mm (Height). It weighs 9.6kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose