Schneider Electric

Schneider Electric LXM32MD30N4 Lxm32 Modular 30A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32MD30N4
UPC:
3606480076893
Condition:
New
Ambient Air Temperature For Storage:
-25-70 °C
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Format Of The Drive:
book
Output Voltage:
<= power supply voltage
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Number Of Addresses:
1-247 Modbus
Discrete Output Voltage:
<= 30 V DC
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Discrete Output Number:
3
Electrical Isolation:
between power and control
Warranty:
18 months
Signalling Function:
display of faults 7 segments
Supply Voltage Limits:
170-264 V || 323-528 V
Ambient Air Temperature For Operation:
0-50 °C UL
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Network Frequency:
47.5...63 Hz
Pvc Free:
Yes
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Braking Current:
50 mA
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Power:
2 kW 208 V 8 kHz || 3 kW 400 V 8 kHz || 3 kW 480 V 8 kHz
Width:
68 mm
Supply Frequency:
50/60 Hz - 5...5 %
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Connector Type:
RJ45 (labelled CN7) Modbus
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Mercury Free:
Yes
Control Signal Type:
servo motor encoder feedback || pulse train output (PTO) RS422 <500 kHz <100 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m || pulse
Switching Frequency:
8 kHz
Status Led:
1 LED (Red) servo drive voltage
Height:
270 mm
Operating Position:
vertical +/- 10 degree
Net Weight:
2.7 kg
Continuous Output Current:
10 A 8 kHz
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Depth:
237 mm
Line Current:
9.2 A 59 % 208 V, with external line choke 1 mH || 11.1 A 77 % 400 V, with external line choke 1 mH || 9.6 A 85 % 480 V, with external line choke 1 mH || 9.8 A 128 % 208 V, without line choke || 8.3 A 148 % 400 V, without line choke || 7 A 152 % 480
Environmental Disclosure:
ENVPEP110705EN
Circularity Profile:
ENVEOLI110605EN
Discrete Output Type:
logic DO)24 V DC
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Type Of Cooling:
integrated fan
Rohs Exemption Information:
Yes
China Rohs Regulation:
X
Discrete Input Number:
2 capture || 2 safety || 4 logic
Phase:
three phase
Product Or Component Type:
motion servo drive
Standards:
EN/IEC 61800-5-1 || EN/IEC 61800-3
Overvoltage Category:
III
Product Certifications:
UL || TÜV || CSA
Continuous Power:
2800 W 208 V || 5600 W 400 V || 5600 W 480 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Response Time On Output:
250 µs DO)discrete
Communication Interface:
Modbus, Integrated || CANopen, with separated communication card || CANmotion, with separated communication card || Ethernet/IP, with separated communication card || EtherCAT, with separated communication card || Profibus, with separated communicatio
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Maximum Leakage Current:
30 mA
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Emc Filter:
integrated
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Safety Function:
STO (safe torque off), Integrated || SS1 (safe stop 1), with separated eSM safety card || SS2 (safe stop 2), with separated eSM safety card || SLS (safe limited speed), with separated eSM safety card || SOS (safe operating stop), with separated eSM s
Sustainable Offer Status:
Green Premium product
Range Of Product:
Lexium 32
Marking:
CE
Sampling Duration:
DI 0.25 ms discrete || 0.25 ms
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Product Compatibility:
servo motor BMH 100 mm, 3 || servo motor BMH 140 mm, 3 || servo motor BMH 190 mm, 1 || servo motor BMH 190 mm, 2 || servo motor BMH 190 mm, 3 || servo motor BMH 205 mm, 3 || servo motor BSH 140 mm, 2 || servo motor BSH 140 mm, 3 || servo motor BSH 14
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Device Short Name:
LXM32M
Output Current 3S Peak:
30 A 208 V 5 s || 30 A 480 V 5 s
Physical Interface:
2-wire RS485 multidrop Modbus
Pollution Degree:
2 EN/IEC 61800-5-1
Datasheet:
View
$1,915.04

Description

This Lexium 32 servo drive works at a rated supply voltage from 208V ac to 480V ac. It can feed 3-phase synchronous motors BMH or BSH, its continuous output current is 10A at 8kHz. The compact size of the servo drive and associated servo motor provides maximum power in the minimum space. This servo drive is specifically designed for industrial machines. It offers high performance, power and simplicity of use in motion control applications. It complies with international standards IEC/EN 61800-5-1, IEC/EN 61800-3, and is UL and CSA and is UL and CSA certified and CE marked. It has been developed to meet the requirements of directives regarding protection of the environment (RoHS).
View AllClose

Related Products

Related Products