Schneider Electric LXM32MU90M2 Lxm32 Modular 9A Rms Peak 1Ph 230V

(No reviews yet) Write a Review
SKU:
LXM32MU90M2
UPC:
3606480076831
Condition:
New
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Safety Function:
STO (safe torque off), Integrated || SS1 (safe stop 1), with separated eSM safety card || SS2 (safe stop 2), with separated eSM safety card || SLS (safe limited speed), with separated eSM safety card || SOS (safe operating stop), with separated eSM s
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Compatibility:
servo motor BMH 70 mm, 1 || servo motor BSH 70 mm, 1 || servo motor BSH 55 mm, 3 || servo motor BSH 55 mm, 1 || servo motor BSH 55 mm, 2
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Height:
270 mm
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Switching Frequency:
8 kHz
Ambient Air Temperature For Operation:
0-50 °C UL
Sampling Duration:
DI 0.25 ms discrete || 0.25 ms
Mercury Free:
Yes
Physical Interface:
2-wire RS485 multidrop Modbus
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP110705EN
Marking:
CE
Circularity Profile:
ENVEOLI110605EN
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Output Voltage:
<= power supply voltage
Standards:
EN/IEC 61800-5-1 || EN/IEC 61800-3
Pvc Free:
Yes
Maximum Leakage Current:
30 mA
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Format Of The Drive:
book
Connector Type:
RJ45 (labelled CN7) Modbus
Width:
68 mm
Phase:
single phase
Discrete Output Voltage:
<= 30 V DC
Pollution Degree:
2 EN/IEC 61800-5-1
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Emc Filter:
integrated
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Range Of Product:
Lexium 32
Warranty:
18 months
Nominal Power:
0.3 kW 115 V 8 kHz || 0.5 kW 230 V 8 kHz
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Supply Frequency:
50/60 Hz - 5...5 %
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Response Time On Output:
250 µs DO)discrete
Continuous Power:
400 W 115 V || 900 W 230 V
Discrete Input Number:
2 capture || 2 safety || 4 logic
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Depth:
237 mm
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Output Type:
logic DO)24 V DC
Number Of Addresses:
1-247 Modbus
Braking Current:
50 mA
Ambient Air Temperature For Storage:
-25-70 °C
Net Weight:
1.8 kg
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Status Led:
1 LED (Red) servo drive voltage
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Line Current:
5.2 A 90 % 115 V, with external line choke 2 mH || 6.3 A 107 % 230 V, with external line choke 2 mH || 5.4 A 159 % 115 V, without line choke || 4.5 A 166 % 230 V, without line choke
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Output Current 3S Peak:
6 A 115 V 5 s || 9 A 230 V 5 s
Continuous Output Current:
3 A 8 kHz
Discrete Output Number:
3
Device Short Name:
LXM32M
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Electrical Isolation:
between power and control
Control Signal Type:
servo motor encoder feedback || pulse train output (PTO) RS422 <500 kHz <100 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m || pulse
Communication Interface:
Modbus, Integrated || CANopen, with separated communication card || Ethernet/IP, with separated communication card || EtherCAT, with separated communication card || Profibus, with separated communication card || DeviceNet, with separated communicatio
Product Certifications:
CSA || TÜV || UL
Operating Position:
vertical +/- 10 degree
China Rohs Regulation:
X
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Overvoltage Category:
III
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Supply Voltage Limits:
85-132 V || 170-264 V
Type Of Cooling:
natural convection
Signalling Function:
display of faults 7 segments
Rohs Exemption Information:
Yes
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Product Or Component Type:
motion servo drive
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Network Frequency:
47.5...63 Hz
Datasheet:
View
$1,249.85

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 3A at 8kHz and a continuous power of 900W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose