Schneider Electric M9F23170 Multi9 C60Sp 1P D 0,5A 10Ka 277V Ul1077

(No reviews yet) Write a Review
SKU:
M9F23170
UPC:
3606481168894
Condition:
New
[Uimp] Rated Impulse Withstand Voltage:
6 kVEN/IEC 60947-2
Suitability For Isolation:
yes EN/IEC 60947-2
Operating Altitude:
0...6561.68 ft (0...2000 m)
Electrical Durability:
10000 cycles
Relative Humidity:
95-95 % 55-55 °C
Local Signalling:
ON/OFF indication
Network Type:
DC || AC
[Ics] Rated Service Breaking Capacity:
2.25 kA 75 % EN/IEC 60947-2 - 415 V AC || 7.5 kA 75 % EN/IEC 60947-2 - 240 V AC || 20 kA 100 % EN/IEC 60947-2 - 60 V DC || 2.25 kA 75 % GB 14048.2 - 415 V AC || 7.5 kA 75 % GB 14048.2 - 240 V AC || 20 kA 100 % GB 14048.2 - 60 V DC
Mounting Mode:
clip-on
Eu Rohs Directive:
Compliant with Exemptions
Width:
18 mm
Device Application:
distribution
Tropicalisation:
2 IEC 60068-1
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
9 Mm Pitches:
2
Magnetic Tripping Limit:
12 x In +/- 20 % AC || 17 x In +/- 20 % DC
Device Short Name:
C60SP
Mounting Support:
DIN rail
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
EN/IEC 60947-2 || GB 14048.2 || UL 1077 || CSA C22.2 No 235
[Ue] Rated Operational Voltage:
240 V AC 50/60 Hz || 415 V AC 50/60 Hz || 60 V DC
Provision For Padlocking:
padlockable
Contact Position Indicator:
yes
Ambient Air Temperature For Operation:
-30-70 °C
Trip Unit Technology:
thermal-magnetic
Poles Description:
1P
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Certifications:
IEC || CCC || UR || CSA
Tightening Torque:
2.5-2.5 N.m top or bottom
Sustainable Offer Status:
Green Premium product
Line Rated Current:
0.5 A 25 °C EN/IEC 60947-2
Control Type:
toggle
Depth:
72 mm
Rohs Exemption Information:
Yes
Number Of Protected Poles:
1
Pollution Degree:
3 EN/IEC 60947-2
Color:
Gray
Height:
81 mm
Mechanical Durability:
20000 cycles
Curve Code:
D
Connections - Terminals:
tunnel type terminal top or bottom) 1-25 mm² AWG 18...AWG 8) - rigid || tunnel type terminal top or bottom) 1-16 mm² AWG 18...AWG 8) - flexible with ferrule || tunnel type terminal top or bottom) 1-16 mm² AWG 18...AWG 8) - flexible
Product Name:
Multi9 C60
Range:
Multi9
Breaking Capacity:
10 kA AIR 277 V AC UL 1077 || 14 kA AIR 240 V AC UL 1077 || 14 kA AIR 120 V AC UL 1077 || 10 kA AIR 65 V DC UL 1077 || 10 kA AIR 277 V AC CSA C22.2 No 235 || 14 kA AIR 240 V AC CSA C22.2 No 235 || 14 kA AIR 120 V AC CSA C22.2 No 235 || 10 kA AIR 65 V
Product Or Component Type:
miniature circuit-breaker
Ambient Air Temperature For Storage:
-40-80 °C
Mercury Free:
Yes
Earth-Leakage Protection:
without
[Ui] Rated Insulation Voltage:
500 V AC EN/IEC 60947-2
Halogen Content Performance:
Halogen free product
Environmental Disclosure:
ENVPEP1304004EN
Wire Stripping Length:
14 mm for top or bottom connection
Circularity Profile:
N/A
Ip Degree Of Protection:
IP20 conforming to IEC 60529 || IP40 (modular enclosure) conforming to IEC 60529
$101.00

Description

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole, 0.5A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 3kA at 415VAC conforming to EN/IEC 60947-2 standard and 3kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 18mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.
View AllClose