Schneider Electric RE22R1HMR Pulse-On Energisation Timer Relay
Schneider Electric
$63.16
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RE22R1HMR Pulse-On Energisation Timer Relay
This Harmony RE22 modular dual function timer can be set between 1 seconds and 300 hours, has an output rating of 8 amperes and it is 22.5 millimeters wide. This modular dual function timing relay is ideal for providing timing control in automation systems such as automatic door opening, alarm, lighting in toilets and car park barriers. It has one of market slimmest form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 2-pole DIN device. Dual function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- Shock Resistance:
- 15 gn not operating 11 ms IEC 60068-2-27 || 5 gn in operation 11 ms IEC 60068-2-27
- Contacts Type And Composition:
- 1 C/O timed contact, cadmium free
- Power Consumption In Va:
- 3-3 VA 240 V AC
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Mechanical Durability:
- 10000000 cycles
- Input Voltage:
- <= 2.4 V
- Immunity To Microbreaks:
- 10 ms
- Switching Capacity In Va:
- 2000 VA
- Width:
- 22.5 mm
- Maximum Switching Voltage:
- 250 V AC
- Directives:
- 2006/95/EC - low voltage directive || 2004/108/EC - electromagnetic compatibility
- Electromagnetic Compatibility:
- fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4 || surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5 || surge immunity test - test level: 2
- Voltage Range:
- 0.85...1.1 Us
- Minimum Switching Current:
- 10 mA 5 V DC
- Status Led:
- Green LED backlight steady)dial pointer indication || Yellow LED steady)output relay energised || Yellow LED fast flashing)timing in progress and output relay de-energised || Yellow LED slow flashing)timing in progress and output relay energised
- Range Of Product:
- Harmony Timer Relays
- Time Delay Range:
- 3...30 s || 0.3...3 s || 30...300 s || 30...300 h || 0.05...1 s || 1...10 s || 3...30 min || 30...300 min || 3...30 h || 10...100 s
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Ambient Air Temperature For Storage:
- -40-70 °C
- Mounting Support:
- 35 mm DIN rail conforming to IEC 60715
- Environmental Disclosure:
- ENVPEP1401008EN
- Pollution Degree:
- 3 IEC 60664-1
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Voltage Drift:
- +/- 0.2 %/V
- Rohs Exemption Information:
- Yes
- Control Type:
- rotary knob || diagnostic button
- China Rohs Regulation:
- X
- Net Weight:
- 0.1 kg
- Product Certifications:
- CE || EAC || CSA || RCM || CCC || GL || UL
- Supply Frequency:
- 50...60 Hz +/- 5 %
- Reset Time:
- 120 ms on de-energisation
- Electrical Durability:
- 100000 cycles, 8 A at 250 V, AC-1 || 100000 cycles, 2 A at 24 V, DC-1
- Vibration Resistance:
- 20 m/s² 10-150 Hz)IEC 60068-2-6
- Nominal Output Current:
- 0.333333333333333
- Circularity Profile:
- ENVEOLI1401008EN
- Repeat Accuracy:
- +/- 0.5 % IEC 61812-1
- Maximum Switching Current:
- 0.333333333333333
- Insulation Resistance:
- 100 MOhm 500 V DC IEC 60664-1
- Maximum Delay Response:
- 100 ms
- Mounting Position:
- any position
- Overvoltage Category:
- III IEC 60664-1
- Device Short Name:
- RE22
- Relative Humidity:
- 95-95 % 25-55 °C
- Creepage Distance:
- 4 kV/3 IEC 60664-1
- Mercury Free:
- Yes
- Time Delay Type:
- interval
- Dielectric Strength:
- 2.5 kV 1 mA/1 minute 50 Hz between relay output and power supply basic insulation IEC 61812-1
- [Us] Rated Supply Voltage:
- 24...240 V AC/DC 50/60 Hz
- Sustainable Offer Status:
- Green Premium product
- Ambient Air Temperature For Operation:
- -20-60 °C
- Connections - Terminals:
- screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end |
- [Uimp] Rated Impulse Withstand Voltage:
- 5 kV 1.2-50 µs IEC 60664-1
- Safety Reliability Data:
- B10d = 280000 || MTTFd = 308.2 years
- Discrete Output Type:
- relay
- Temperature Drift:
- +/- 0.05 %/°C
- Housing Material:
- self-extinguishing
- Standards:
- UL 508 || IEC 61812-1
- Product Or Component Type:
- dual function relay
- Power Consumption In W:
- 1.5 W 240 V DC
- Setting Accuracy Of Time Delay:
- +/- 10 % of full scale 25 °C IEC 61812-1
- Minimum Pulse Duration:
- 100 ms with load in parallel || 30 ms
- Ip Degree Of Protection:
- housing IP40 IEC 60529 || front face IP50 IEC 60529 || terminals IP20 IEC 60529
- Tightening Torque:
- 0.6-1 N.m IEC 60947-1
- Catalog:
- View
- Datasheet:
- View
