Schneider Electric RE22R2QTMR Star-Delta Timer Relay

(No reviews yet) Write a Review
SKU:
RE22R2QTMR
UPC:
3606480792540
Condition:
New
Net Weight:
0.105 kg
Mounting Support:
35 mm DIN rail conforming to IEC 60715
Repeat Accuracy:
+/- 0.5 % IEC 61812-1
Range Of Product:
Harmony Timer Relays
Vibration Resistance:
20 m/s² 10-150 Hz)IEC 60068-2-6
[Uimp] Rated Impulse Withstand Voltage:
5 kV 1.2-50 µs IEC 60664-1
Voltage Range:
0.85...1.1 Us
[Us] Rated Supply Voltage:
24...240 V AC/DC 50/60 Hz
Creepage Distance:
4 kV/3 IEC 60664-1
Maximum Delay Response:
100 ms
Maximum Switching Voltage:
250 V AC
Power Consumption In W:
1.5 W 240 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mounting Position:
any position
Ambient Air Temperature For Operation:
-20-60 °C
Input Voltage:
<= 2.4 V
Time Delay Range:
1...10 s || 3...30 s || 10...100 s || 30...300 min || 0.05...1 s || 3...30 min || 0.3...3 s || 30...300 s || 3...30 h || 30...300 h
Switching Capacity In Va:
2000 VA
Ambient Air Temperature For Storage:
-40-70 °C
Status Led:
Green LED backlight steady)dial pointer indication || Yellow LED steady)output relay energised || Yellow LED fast flashing)timing in progress and output relay de-energised || Yellow LED slow flashing)timing in progress and output relay energised
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Time Delay Type:
star-delta
Voltage Drift:
+/- 0.2 %/V
Dielectric Strength:
2.5 kV 1 mA/1 minute 50 Hz between relay output and power supply basic insulation IEC 61812-1
Environmental Disclosure:
ENVPEP1401008EN
Contacts Type And Composition:
2 C/O timed contact, cadmium free
Safety Reliability Data:
MTTFd = 342.4 years || B10d = 320000
Setting Accuracy Of Time Delay:
+/- 10 % of full scale 25 °C IEC 61812-1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Tightening Torque:
0.6-1 N.m IEC 60947-1
Product Certifications:
CCC || GL || UL || EAC || RCM || CSA || CE
Connections - Terminals:
screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end |
Overvoltage Category:
III IEC 60664-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Pollution Degree:
3 IEC 60664-1
Immunity To Microbreaks:
10 ms
Ip Degree Of Protection:
housing IP40 IEC 60529 || terminals IP20 IEC 60529 || front panel IP50 IEC 60529
Electromagnetic Compatibility:
fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4 || surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5 || surge immunity test - test level: 2
Mechanical Durability:
10000000 cycles
Supply Frequency:
50...60 Hz +/- 5 %
Relative Humidity:
95-95 % 25-55 °C
Insulation Resistance:
100 MOhm 500 V DC IEC 60664-1
Directives:
2006/95/EC - low voltage directive || 2004/108/EC - electromagnetic compatibility
Control Type:
rotary knob || diagnostic button
Width:
22.5 mm
Reset Time:
120 ms on de-energisation
Minimum Switching Current:
10 mA 5 V DC
Electrical Durability:
100000 cycles, 8 A at 250 V, AC-1 || 100000 cycles, 2 A at 24 V, DC-1
Sustainable Offer Status:
Green Premium product
Device Short Name:
RE22
Discrete Output Type:
relay
Standards:
IEC 61812-1 || UL 508
Circularity Profile:
ENVEOLI1401008EN
Power Consumption In Va:
3-3 VA 240 V AC
Product Or Component Type:
single function relay
Shock Resistance:
15 gn not operating 11 ms IEC 60068-2-27 || 5 gn in operation 11 ms IEC 60068-2-27
Temperature Drift:
+/- 0.05 %/°C
Housing Material:
self-extinguishing
Nominal Output Current:
0.333333333333333
Maximum Switching Current:
0.333333333333333
China Rohs Regulation:
X
Catalog:
View
Datasheet:
View
  • Schneider Electric RE22R2QTMR Star-Delta Timer Relay
  • Schneider Electric RE22R2QTMR Star-Delta Timer Relay
  • Schneider Electric RE22R2QTMR Star-Delta Timer Relay
$70.48

Description

This Harmony RE22 modular single function timer can be set between 1 seconds and 300 hours. It provides function Qt and it is mountable on DIN rail. This modular single function timing relay is ideal for providing timing control in automation systems such as automatic door opening, alarm, lighting in toilets and car park barriers. It has one of market slimmest form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 2-pole DIN device. It also offers a sealable cover, simple and precise settings with rotary trimmers. Selectable timing range offers a one stop solution for your power management system. Single function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose