Schneider Electric RM17TT00 Ph Rotation:Failure 208-480Vac 1C/O Uv

(No reviews yet) Write a Review
SKU:
RM17TT00
UPC:
3389119405089
Condition:
New
Standards:
IEC 60255-1
Control Type:
without test button
Product Or Component Type:
3-phase control relay
Measurement Range:
208...480 V voltage AC
Range Of Product:
Harmony Control Relays
Width:
17.5 mm
Tightening Torque:
0.6-1 N.m IEC 60947-1
Circularity Profile:
ENVEOLI1504008EN
Maximum Switching Voltage:
250 V AC || 250 V DC
Reset Time:
1500 ms time delay
Switching Capacity In Va:
1250 VA
Electrical Durability:
100000 cycles
Ambient Air Temperature For Storage:
-40-70 °C
Connections - Terminals:
screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end ||
Nominal Output Current:
0.208333333333333
Maximum Switching Current:
5 A AC || 5 A DC
Relay Monitored Parameters:
phase failure detection || phase sequence
Time Delay Type:
without
Rohs Exemption Information:
Yes
Insulation Resistance:
> 500 MOhm 500 V DC IEC 60255-5 || > 500 MOhm 500 V DC IEC 60664-1
Net Weight:
0.13 kg
Operating Position:
any position without derating
Control Circuit Voltage Limits:
12 % + 10 % Un
Dielectric Test Voltage:
2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
Product Specific Application:
for 3-phase supply
Directives:
73/23/EEC - low voltage directive || 89/336/EEC - electromagnetic compatibility
Supply Frequency:
50/60 Hz +/- 10 %
Measurement Voltage Limits:
183-528 V AC
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
Marking:
CE
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Vibration Resistance:
0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1
[Uc] Control Circuit Voltage:
208...480 V
Supply Voltage Limits:
183-528 V AC
Overvoltage Category:
III IEC 60664-1
Housing Material:
self-extinguishing plastic
Product Certifications:
UL || GL || C-tick || GOST || CSA
[Ui] Rated Insulation Voltage:
400 V IEC 60664-1
Repeat Accuracy:
0.5 % input and measurement circuit || 3 % time delay
Control Circuit Frequency:
50...60 Hz +/- 10 %
Relative Humidity:
95-95 % 55-55 °C IEC 60068-2-30
Measurement Error:
< 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation
Hysteresis:
2-2 %
Utilisation Category:
AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1
Non-Dissipating Shock Wave:
4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
Voltage Range:
208...480 V phase to phase
Mechanical Durability:
30000000 cycles
Phase Failure Sensitivity:
0.7 Un
Relay Name:
RM17TT
Run-Up Delay At Power-Up:
650 ms
China Rohs Regulation:
X
Electromagnetic Compatibility:
emission standard for industrial environments conforming to IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 || immunity for industrial environments conforming to IEC 61000-6
[Us] Rated Supply Voltage:
self-powered
Power Consumption In Va:
0-22 VA 400 V AC 50 Hz
Minimum Switching Current:
10 mA 5 V DC
Mounting Support:
35 mm symmetrical DIN rail conforming to IEC 60715
Mercury Free:
Yes
Adjustment Of Asymmetry Threshold:
5...15 % of Un selected
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Contacts Type And Composition:
1 C/O
Output Contacts:
1 C/O
Operating Rate:
<= 360 operations/hour full load
Ambient Air Temperature For Operation:
-20-50 °C
Relay Type:
multifunction control relay
Maximum Measuring Cycle:
150 ms measurement cycle as true rms value
Pollution Degree:
3 IEC 60664-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Response Time:
< 200 ms (in the event of a fault)
Environmental Disclosure:
ENVPEP1504008EN
Safety Reliability Data:
MTTFd = 502.2 years || B10d = 470000
Local Signalling:
for power ON LED (green) || for relay ON LED (yellow)
Shock Resistance:
15 gn 11 ms IEC 60255-21-1
Catalog:
View
Datasheet:
View
  • Schneider Electric RM17TT00 Ph Rotation:Failure 208-480Vac 1C/O Uv
  • Schneider Electric RM17TT00 Ph Rotation:Failure 208-480Vac 1C/O Uv
  • Schneider Electric RM17TT00 Ph Rotation:Failure 208-480Vac 1C/O Uv
$136.00

Description

This Harmony RM17-TT multi function control relay allows monitoring of power supply circuits in 3-phase networks. This modular multi function 3-phase control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slimmest form-factors with 17.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose