null
Schneider Electric RM22UA23MR Overvoltage Control Relay Rm22-Ua - Rang

Schneider Electric RM22UA23MR Overvoltage Control Relay Rm22-Ua - Rang

Schneider Electric
SKU:
RM22UA23MR
|
UPC:
3606480792229
$161.36
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This Harmony RM22UA control relay allows monitoring of overvoltage control. This modular control relay is ideal for monitoring of electrical values and voltage variation in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slim form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
Additional Information
Hysteresis:
5-50 % adjustable threshold setting
Mercury Free:
Yes
Relay Name:
RM22UA
Switching Capacity In Va:
2000 VA
Dielectric Test Voltage:
2.5 kV AC 50 Hz, 1 min IEC 60255-27
Shock Resistance:
15 gn 11 ms) not in operation IEC 60068-2-27 || 5 gn 11 ms) in operation IEC 60068-2-27
Relative Humidity:
93-97 % 25-55 °C IEC 60068-2-30
Phase:
1 phase
Supply Voltage Limits:
20.4-264 V AC/DC
Safety Reliability Data:
MTTFd = 308.2 years || B10d = 290000
Insulation Resistance:
> 100 MOhm 500 V DC
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Resistance Across Terminals:
150 kOhm E2-M terminals || 300 kOhm E1-M terminals || 500 kOhm E3-M terminals
Reset Time:
1500 ms at maximum voltage
Rohs Exemption Information:
Yes
Power Consumption In Va:
3.5-3.5 VA AC
Electrical Durability:
100000 cycles
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Response Time:
<= 500 ms
Contacts Type And Composition:
2 C/O
Pollution Degree:
3 IEC 60664-1
Time Delay Type:
without
Maximum Switching Voltage:
250 V AC
Tightening Torque:
0.6-1 N.m IEC 60947-1
[Us] Rated Supply Voltage:
AC/DC non self-powered
Repeat Accuracy:
+/- 0.5 % input and measurement circuit
Standards:
IEC 60255-1
Ambient Air Temperature For Operation:
-20-50 °C 60 Hz || -20-60 °C 50 Hz
Run-Up Delay At Power-Up:
600 ms
China Rohs Regulation:
X
Supply Circuit Type:
DC
Width:
22.5 mm
Maximum Switching Current:
8 A AC
Housing Material:
self-extinguishing plastic
Minimum Switching Current:
10 mA 5 V DC
Maximum Power Consumption In W:
1.5 W DC
Mounting Support:
35 mm DIN rail conforming to IEC 60715
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 housing) || IP50 IEC 60529 front panel)
Vibration Resistance:
0.075 mm 10-58.1 Hz) not in operation IEC 60068-2-6 || 1 gn 10-58.1 Hz) not in operation IEC 60068-2-6 || 0.035 mm 58.1-150 Hz) in operation IEC 60068-2-6 || 0.5 gn 58.1-150 Hz) in operation IEC 60068-2-6
Overvoltage Category:
III IEC 60664-1
Maximum Measuring Cycle:
100 ms measurement cycle as true rms value
Relay Type:
voltage control relay
Connections - Terminals:
screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end || screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end |
Mechanical Durability:
10000000 cycles
Measurement Error:
< 1 % over the whole range with voltage variation || 0.05 %/°C with temperature variation
Output Contacts:
2 C/O
Insulation:
between supply and measurement
Circularity Profile:
ENVEOLI1504008EN
Measurement Range:
15...500 V voltage AC/DC 50/60 Hz
Contacts Material:
cadmium free
[Uimp] Rated Impulse Withstand Voltage:
5 kV 1.2/50 µs IEC 60255-27
Control Type:
with test button
[Ui] Rated Insulation Voltage:
250 V IEC 60664-1
Relay Monitored Parameters:
overvoltage detection
Net Weight:
0.11 kg
Product Certifications:
CE || CCC || GL || RCM || UL || EAC || CSA
Immunity To Microbreaks:
10 ms
Ambient Air Temperature For Storage:
-40-70 °C
Utilisation Category:
AC-15 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || AC-1 IEC 60947-4-1 || DC-1 IEC 60947-4-1
Electromagnetic Compatibility:
immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1 || immunity for industrial environments conforming to IEC 61000-6-2 || emission standard for residential, commercial and light-industrial environments
Environmental Disclosure:
ENVPEP1504008EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Compatibility Code:
RM22
Range Of Product:
Harmony Control Relays
Product Or Component Type:
voltage control relay
Catalog:
View
Datasheet:
View