Schneider Electric RM22UA31MR Voltage Control Relay Rm22-Ua - Range 50

(No reviews yet) Write a Review
SKU:
RM22UA31MR
UPC:
3606480792236
Condition:
New
Product Certifications:
CE || CSA || RCM || GL || CCC || EAC || UL
Contacts Material:
cadmium free
Circularity Profile:
ENVEOLI1504008EN
Mercury Free:
Yes
Sustainable Offer Status:
Green Premium product
Utilisation Category:
AC-15 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || AC-1 IEC 60947-4-1 || DC-1 IEC 60947-4-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-20-50 °C 60 Hz || -20-60 °C 50 Hz
Relative Humidity:
93-97 % 25-55 °C IEC 60068-2-30
Minimum Switching Current:
10 mA 5 V DC
Connections - Terminals:
screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end || screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || s
Power Consumption In Va:
3.5-3.5 VA AC
Relay Name:
RM22UA
Tightening Torque:
0.6-1 N.m IEC 60947-1
Response Time:
<= 500 ms
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Output Current:
0.333333333333333
Relay Type:
voltage control relay
Shock Resistance:
15 gn 11 ms) not in operation IEC 60068-2-27 || 5 gn 11 ms) in operation IEC 60068-2-27
Ambient Air Temperature For Storage:
-40-70 °C
Vibration Resistance:
0.075 mm 10-58.1 Hz) not in operation IEC 60068-2-6 || 1 gn 10-58.1 Hz) not in operation IEC 60068-2-6 || 0.035 mm 58.1-150 Hz) in operation IEC 60068-2-6 || 0.5 gn 58.1-150 Hz) in operation IEC 60068-2-6
Electrical Durability:
100000 cycles
Hysteresis:
3-3 % fixed full scale for window mode || 5-50 % adjustable threshold setting
Electromagnetic Compatibility:
immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1 || immunity for industrial environments conforming to IEC 61000-6-2 || emission standard for residential, commercial and light-industrial environments
Switching Capacity In Va:
2000 VA
Run-Up Delay At Power-Up:
600 ms
Product Or Component Type:
voltage control relay
Repeat Accuracy:
+/- 0.5 % input and measurement circuit || +/- 2 % time delay
Mechanical Durability:
10000000 cycles
Time Delay Type:
adjustable 0.1...30 s, +/- 10 % of the full scale value Tt- time delay upon fault
[Us] Rated Supply Voltage:
AC/DC non self-powered
Reset Time:
1500 ms at maximum voltage
Control Type:
with test button
Maximum Power Consumption In W:
1.5 W DC
China Rohs Regulation:
X
Resistance Across Terminals:
30 kOhm E2-M terminals || 5 kOhm E1-M terminals || 50 kOhm E3-M terminals
Overvoltage Category:
III IEC 60664-1
Functionality:
undervoltage and overvoltage in window mode
Range Of Product:
Harmony Control Relays
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 housing) || IP50 IEC 60529 front panel)
Mounting Support:
35 mm DIN rail conforming to IEC 60715
Supply Voltage Limits:
20.4-264 V AC/DC
Maximum Measuring Cycle:
100 ms measurement cycle as true rms value
Contacts Type And Composition:
2 C/O
Width:
22.5 mm
Environmental Disclosure:
ENVPEP1504008EN
Dielectric Test Voltage:
2.5 kV AC 50 Hz, 1 min IEC 60255-27
Rohs Exemption Information:
Yes
Phase:
1 phase
Insulation Resistance:
> 100 MOhm 500 V DC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Supply Circuit Type:
DC
Compatibility Code:
RM22
Housing Material:
self-extinguishing plastic
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Measurement Error:
< 1 % over the whole range with voltage variation || 0.05 %/°C with temperature variation
Relay Monitored Parameters:
undervoltage and overvoltage in window mode || overvoltage or undervoltage detection
Measurement Range:
0.05...5 V voltage AC/DC 50/60 Hz
Insulation:
between supply and measurement
Output Contacts:
2 C/O
Net Weight:
0.11 kg
Immunity To Microbreaks:
10 ms
Pollution Degree:
3 IEC 60664-1
Maximum Switching Voltage:
250 V AC
Safety Reliability Data:
MTTFd = 308.2 years || B10d = 290000
Maximum Switching Current:
8 A AC
Standards:
IEC 60255-1
  • Schneider Electric RM22UA31MR Voltage Control Relay Rm22-Ua - Range 50
  • Schneider Electric RM22UA31MR Voltage Control Relay Rm22-Ua - Range 50
$126.39

Description

This Harmony RM22-UA relay allows monitoring of voltage control in single phase networks. This modular multi function single phase voltage control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slim form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a diagnostic button, sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose