Schneider Electric RM22UA32MR Voltage Control Relay Rm22-Ua - Range 1V

(No reviews yet) Write a Review
SKU:
RM22UA32MR
UPC:
3606480792243
Condition:
New
Standards:
IEC 60255-1
Pollution Degree:
3 IEC 60664-1
Environmental Disclosure:
ENVPEP1504008EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
35 mm DIN rail conforming to IEC 60715
Shock Resistance:
15 gn 11 ms) not in operation IEC 60068-2-27 || 5 gn 11 ms) in operation IEC 60068-2-27
Maximum Power Consumption In W:
1.5 W DC
Net Weight:
0.11 kg
Range Of Product:
Harmony Control Relays
Relative Humidity:
93-97 % 25-55 °C IEC 60068-2-30
Time Delay Type:
adjustable 0.1...30 s, +/- 10 % of the full scale value Tt- time delay upon fault
China Rohs Regulation:
X
Maximum Switching Voltage:
250 V AC
Output Contacts:
2 C/O
Contacts Material:
cadmium free
Relay Type:
voltage control relay
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 housing) || IP50 IEC 60529 front panel)
Relay Name:
RM22UA
Utilisation Category:
AC-15 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || AC-1 IEC 60947-4-1 || DC-1 IEC 60947-4-1
Functionality:
undervoltage and overvoltage in window mode
Nominal Output Current:
0.333333333333333
Minimum Switching Current:
10 mA 5 V DC
Mercury Free:
Yes
[Us] Rated Supply Voltage:
non self-powered
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Electrical Durability:
100000 cycles
Run-Up Delay At Power-Up:
600 ms
Control Type:
with test button
Mechanical Durability:
10000000 cycles
Tightening Torque:
0.6-1 N.m IEC 60947-1
Contacts Type And Composition:
2 C/O
Rohs Exemption Information:
Yes
Hysteresis:
3-3 % fixed full scale for window mode || 5-50 % adjustable threshold setting
Supply Circuit Type:
DC
Power Consumption In Va:
3.5-3.5 VA AC
Sustainable Offer Status:
Green Premium product
Phase:
1 phase
Ambient Air Temperature For Operation:
-20-50 °C 60 Hz || -20-60 °C 50 Hz
Insulation:
between supply and measurement
Dielectric Test Voltage:
2.5 kV AC 50 Hz, 1 min IEC 60255-27
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Relay Monitored Parameters:
undervoltage and overvoltage in window mode || overvoltage or undervoltage detection
Switching Capacity In Va:
2000 VA
Product Or Component Type:
voltage control relay
Product Certifications:
GL || UL || CCC || EAC || CE || RCM || CSA
Measurement Range:
1...100 V voltage AC/DC 50/60 Hz
Immunity To Microbreaks:
10 ms
Housing Material:
self-extinguishing plastic
Insulation Resistance:
> 100 MOhm 500 V DC
Response Time:
<= 500 ms
Maximum Switching Current:
8 A AC
Maximum Measuring Cycle:
100 ms measurement cycle as true rms value
Reset Time:
1500 ms at maximum voltage
Measurement Error:
< 1 % over the whole range with voltage variation || 0.05 %/°C with temperature variation
Resistance Across Terminals:
110 kOhm E2-M terminals || 22 kOhm E1-M terminals || 220 kOhm E3-M terminals
Repeat Accuracy:
+/- 0.5 % input and measurement circuit || +/- 2 % time delay
Ambient Air Temperature For Storage:
-40-70 °C
Compatibility Code:
RM22
Width:
22.5 mm
Circularity Profile:
ENVEOLI1504008EN
Vibration Resistance:
0.075 mm 10-58.1 Hz) not in operation IEC 60068-2-6 || 1 gn 10-58.1 Hz) not in operation IEC 60068-2-6 || 0.035 mm 58.1-150 Hz) in operation IEC 60068-2-6 || 0.5 gn 58.1-150 Hz) in operation IEC 60068-2-6
Safety Reliability Data:
B10d = 290000 || MTTFd = 308.2 years
Connections - Terminals:
screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end || screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || s
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electromagnetic Compatibility:
immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1 || immunity for industrial environments conforming to IEC 61000-6-2 || emission standard for residential, commercial and light-industrial environments
Overvoltage Category:
III IEC 60664-1
Supply Voltage Limits:
20.4-264 V AC/DC
  • Schneider Electric RM22UA32MR Voltage Control Relay Rm22-Ua - Range 1V
  • Schneider Electric RM22UA32MR Voltage Control Relay Rm22-Ua - Range 1V
  • Schneider Electric RM22UA32MR Voltage Control Relay Rm22-Ua - Range 1V
$115.74

Description

This Harmony RM22-UA relay allows monitoring of voltage control in single phase networks. This modular multi function single phase voltage control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slim form-factors with 22.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a diagnostic button, sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose