- Immunity To Microbreaks:
- 50 ms
- Relay Monitored Parameters:
- overcurrent or undercurrent in window mode || overcurrent or undercurrent detection
- Local Signalling:
- for relay ON LED (yellow) || for power ON LED (green)
- Range Of Product:
- Harmony Control Relays
- Setting Accuracy Of Time Delay:
- 0.916666666666667
- Housing Material:
- self-extinguishing plastic
- Tightening Torque:
- 0.6-1 N.m IEC 60947-1
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Contacts Material:
- cadmium free
- Maximum Power Consumption In W:
- 1.5 W DC
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Relay Name:
- RM35JA
- Supply Voltage Limits:
- 20.4-264 V AC/DC
- Insulation Resistance:
- > 100 MOhm 500 V DC IEC 60255-27
- Electrical Durability:
- 100000 cycles
- Measurement Error:
- < 1 % over the whole range with voltage variation || 0.05 %/°C with temperature variation
- Resistance Across Terminals:
- 0.005 Ohm E3-M terminals || 0.015 Ohm E2-M terminals || 0.05 Ohm E1-M terminals
- Circularity Profile:
- ENVEOLI1504008EN
- Nominal Output Current:
- 0.333333333333333
- Electromagnetic Compatibility:
- immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1 || immunity for industrial environments conforming to IEC 61000-6-2 || emission standard for industrial environments conforming to IEC 61000-6-4 || ele
- Threshold Setting:
- 10...100 %
- Minimum Switching Current:
- 10 mA 5 V DC
- Time Delay Drift:
- <= 0.05 % per degree centigrade depending permissible ambient air temperature || <= 1 % within the supply voltage range
- Maximum Power Consumption In Va:
- 3.5 VA
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- China Rohs Regulation:
- X
- Mechanical Durability:
- 10000000 cycles
- Pollution Degree:
- 3 IEC 60664-1 || 3 UL 508
- Rohs Exemption Information:
- Yes
- Relay Type:
- current control relay
- Hysteresis:
- 5-50 % adjustable threshold setting || 3-3 % fixed full scale for window mode
- Utilisation Category:
- AC-15 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || AC-1 IEC 60947-4-1 || DC-1 IEC 60947-4-1
- Width:
- 35 mm
- Standards:
- IEC 60255-1
- Maximum Measuring Cycle:
- 100 ms measurement cycle as true rms value
- Output Contacts:
- 2 C/O
- Product Or Component Type:
- current control relay
- Time Delay Type:
- adjustable 0.1...30 s, +/- 10 % of the full scale value Tt- time delay upon fault
- Sustainable Offer Status:
- Green Premium product
- Environmental Characteristic:
- 3K3 C
- Measurement Range:
- 0.15...1.5 A AC/DC E1-M terminals || 0.5...5 A E2-M terminals || 1.5...15 A E3-M terminals || 150 mA...15 A current AC/DC 50/60 Hz
- Control Circuit Voltage Limits:
- 15 % + 10 % Un
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Contacts Type And Composition:
- 2 C/O
- Mounting Support:
- 35 mm DIN rail conforming to IEC 60715
- Ambient Air Temperature For Operation:
- -20-50 °C 60 Hz || -20-60 °C 50 Hz
- Maximum Switching Voltage:
- 250 V AC
- Ambient Air Temperature For Storage:
- -40-70 °C
- Control Type:
- with test button
- Relative Humidity:
- 93-97 % 25-55 °C IEC 60068-2-30
- Reset Time:
- 1500 ms at maximum voltage
- Insulation:
- between supply and measurement
- Response Time:
- <= 500 ms (on crossing the threshold)
- Setting Accuracy Of The Switching Threshold:
- +/- 10 % of the full scale
- Repeat Accuracy:
- +/- 0.5 % input and measurement circuit || +/- 2 % time delay
- Internal Input Resistance:
- 0.015 Ohm || 0.005 Ohm || 0.05 Ohm
- Ip Degree Of Protection:
- IP20 IEC 60529 terminals) || IP50 IEC 60529 front panel) || IP30 IEC 60529 housing)
- Switching Threshold Drift:
- <= 0.05 % per degree centigrade depending permissible ambient air temperature || <= 1 % within the supply voltage range
- Safety Reliability Data:
- MTTFd = 296.8 years || B10d = 270000
- Dielectric Test Voltage:
- 2.5 kV AC 50 Hz, 1 min IEC 60255-27
- Net Weight:
- 0.12 kg
- [Us] Rated Supply Voltage:
- AC/DC non self-powered
- Product Certifications:
- CE || GL || CCC || EAC || RCM || UL || CSA
- Vibration Resistance:
- 0.075 mm 10-58.1 Hz) not in operation IEC 60068-2-6 || 1 gn 10-58.1 Hz) not in operation IEC 60068-2-6 || 0.035 mm 58.1-150 Hz) in operation IEC 60068-2-6 || 0.5 gn 58.1-150 Hz) in operation IEC 60068-2-6
- Switching Capacity In Va:
- 2000 VA
- Run-Up Delay At Power-Up:
- 0.3 s
- Mercury Free:
- Yes
- Connections - Terminals:
- screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end || screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end |
- Overvoltage Category:
- III IEC 60664-1 || III UL 508
- Shock Resistance:
- 15 gn 11 ms) not in operation IEC 60068-2-27 || 5 gn 11 ms) in operation IEC 60068-2-27
- Environmental Disclosure:
- ENVPEP1504008EN
- Maximum Switching Current:
- 8 A AC
- QN-QUOTE-REQUEST:
- true