Schneider Electric RPM11F7 15A Power Relay 1C/O 120Vac Pack of 10

(No reviews yet) Write a Review
SKU:
RPM11F7
UPC:
3389119401685
Condition:
New
Pollution Degree:
3
Product Or Component Type:
plug-in relay
Load Current:
15 A 250 V AC || 15 A 28 V DC
Standards:
UL 508 || CSA C22.2 No 14 || IEC 61810-1
Average Coil Consumption In Va:
1.6 60 Hz
Rohs Exemption Information:
Yes
Ambient Air Temperature For Storage:
-40-85 °C
Operating Position:
any position
[Uc] Control Circuit Voltage:
120 V AC 50/60 Hz
Range Of Product:
Harmony Electromechanical Relays
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Test Levels:
level A group mounting
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Device Short Name:
RPM
Operating Time:
20 ms at nominal voltage
Environmental Disclosure:
ENVPEP1406038EN
[Ithe] Conventional Enclosed Thermal Current:
15 A -40-55 °C
Safety Reliability Data:
B10d = 100000
Status Led:
without
Net Weight:
0.026 kg
Maximum Switching Voltage:
250 V IEC
Device Presentation:
complete product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Shape Of Pin:
flat
Drop-Out Voltage Threshold:
>= 0.15 Uc AC
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Circularity Profile:
N/A
[Ie] Rated Operational Current:
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
Rated Operational Voltage Limits:
96...132 V AC
Maximum Switching Capacity:
3750 VA || 420 W
Warranty:
18 months
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Mechanical Durability:
10000000 cycles
Contacts Material:
AgNi
Average Resistance:
4430 Ohm at 20 °C +/- 15 %
Sustainable Offer Status:
Green Premium product
Utilisation Coefficient:
0.2
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced
Ambient Air Temperature For Operation:
-40-55 °C
Product Certifications:
UL || EAC || CSA
Reach Free Of Svhc:
Yes
Protection Category:
RT I
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Series Name:
Power
Shock Resistance:
15 gnin operation || 30 gnnot operating
Reset Time:
20 ms at nominal voltage
China Rohs Regulation:
X
Control Type:
lockable test button
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Electrical Durability:
100000 cycles resistive
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Contacts Type And Composition:
1 C/O
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Catalog:
View
Datasheet:
View
  • Schneider Electric RPM11F7 15A Power Relay 1C/O 120Vac Pack of 10
  • Schneider Electric RPM11F7 15A Power Relay 1C/O 120Vac Pack of 10
$54.90

Description

This Harmony RPM power plug-in relay has a coil control voltage of 120V AC and has 1 changeover contact SPDT (single pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0
View AllClose