Schneider Electric RPM21F7 15A Power Relay 2C/O 120Vac Pack of 10
Schneider Electric
$73.20
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RPM21F7 15A Power Relay 2C/O 120Vac Pack of 10
This Harmony RPM power plug-in relay has a coil control voltage of 120V AC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0
- Drop-Out Voltage Threshold:
- >= 0.15 Uc AC
- Average Coil Consumption In Va:
- 1.1 60 Hz
- Shape Of Pin:
- flat
- [Uc] Control Circuit Voltage:
- 120 V AC 50/60 Hz
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Test Levels:
- level A group mounting
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Operating Position:
- any position
- Range Of Product:
- Harmony Electromechanical Relays
- Rated Operational Voltage Limits:
- 96...132 V AC
- Control Type:
- lockable test button
- Reach Free Of Svhc:
- Yes
- Contacts Material:
- AgNi
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Safety Reliability Data:
- B10d = 100000
- China Rohs Regulation:
- X
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Environmental Disclosure:
- ENVPEP1406038EN
- Net Weight:
- 0.036 kg
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Device Presentation:
- complete product
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Contacts Type And Composition:
- 2 C/O
- Product Certifications:
- UL || EAC || CSA
- Series Name:
- Power
- Maximum Switching Voltage:
- 250 V IEC
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Electrical Durability:
- 100000 cycles resistive
- Rohs Exemption Information:
- Yes
- Utilisation Coefficient:
- 0.2
- Product Or Component Type:
- plug-in relay
- Warranty:
- 18 months
- Protection Category:
- RT I
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Device Short Name:
- RPM
- Standards:
- CSA C22.2 No 14 || IEC 61810-1 || UL 508
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- Circularity Profile:
- N/A
- Ambient Air Temperature For Operation:
- -40-55 °C
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- Average Resistance:
- 4430 Ohm at 20 °C +/- 15 %
- Status Led:
- without
- Pollution Degree:
- 3
- Ambient Air Temperature For Storage:
- -40-85 °C
- Sustainable Offer Status:
- Green Premium product
- Operating Time:
- 20 ms at nominal voltage
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Mechanical Durability:
- 10000000 cycles
- Reset Time:
- 20 ms at nominal voltage
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- Catalog:
- View
- Datasheet:
- View
