Schneider Electric RPM21P7 15A Power Relay 2C/O 230Vac Pack of 10
Schneider Electric
$73.20
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RPM21P7 15A Power Relay 2C/O 230Vac Pack of 10
This Harmony RPM power plug-in relay has a coil control voltage of 230V AC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- Reach Free Of Svhc:
- Yes
- Series Name:
- Power
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- Reset Time:
- 20 ms at nominal voltage
- Device Presentation:
- complete product
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Rated Operational Voltage Limits:
- 184...253 V AC
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- [Uc] Control Circuit Voltage:
- 230 V AC 50/60 Hz
- Circularity Profile:
- N/A
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Protection Category:
- RT I
- Drop-Out Voltage Threshold:
- >= 0.15 Uc AC
- Test Levels:
- level A group mounting
- Product Certifications:
- UL || EAC || CSA
- Sustainable Offer Status:
- Green Premium product
- Contacts Type And Composition:
- 2 C/O
- Ambient Air Temperature For Storage:
- -40-85 °C
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Control Type:
- lockable test button
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Electrical Durability:
- 100000 cycles resistive
- Average Resistance:
- 16270 Ohm at 20 °C +/- 15 %
- Maximum Switching Voltage:
- 250 V IEC
- Shape Of Pin:
- flat
- Product Or Component Type:
- plug-in relay
- Safety Reliability Data:
- B10d = 100000
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- Net Weight:
- 0.036 kg
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Status Led:
- without
- Contacts Material:
- AgNi
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Range Of Product:
- Harmony Electromechanical Relays
- Warranty:
- 18 months
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Ambient Air Temperature For Operation:
- -40-55 °C
- Utilisation Coefficient:
- 0.2
- Environmental Disclosure:
- ENVPEP1406038EN
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Device Short Name:
- RPM
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- China Rohs Regulation:
- X
- Standards:
- IEC 61810-1 || UL 508 || CSA C22.2 No 14
- Pollution Degree:
- 3
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Operating Time:
- 20 ms at nominal voltage
- Operating Position:
- any position
- Mechanical Durability:
- 10000000 cycles
- Average Coil Consumption In Va:
- 1.1 60 Hz
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Rohs Exemption Information:
- Yes
- Catalog:
- View
- Datasheet:
- View
