Schneider Electric RPM22BD 15A Power Relay Led 2C/O 24Vdc Pack of 10
Schneider Electric
$83.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RPM22BD 15A Power Relay Led 2C/O 24Vdc Pack of 10
This Harmony RPM power plug-in relay has a coil control voltage of 24V DC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0
- Maximum Switching Voltage:
- 250 V IEC
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- Device Presentation:
- complete product
- [Uc] Control Circuit Voltage:
- 24 V DC
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Standards:
- CSA C22.2 No 14 || IEC 61810-1 || UL 508
- Series Name:
- Power
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Status Led:
- with
- Range Of Product:
- Harmony Electromechanical Relays
- Pollution Degree:
- 3
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- Ambient Air Temperature For Operation:
- -40-55 °C
- Reach Free Of Svhc:
- Yes
- Environmental Disclosure:
- ENVPEP1406038EN
- Rated Operational Voltage Limits:
- 19.2...26.4 V DC
- Operating Position:
- any position
- Circularity Profile:
- N/A
- Rohs Exemption Information:
- Yes
- Operating Time:
- 20 ms at nominal voltage
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Shape Of Pin:
- flat
- Reset Time:
- 20 ms at nominal voltage
- Control Type:
- lockable test button
- Product Certifications:
- EAC || UL || CSA
- Safety Reliability Data:
- B10d = 100000
- Average Coil Consumption:
- 0.85 W
- Protection Category:
- RT I
- Contacts Material:
- AgNi
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Contacts Type And Composition:
- 2 C/O
- Ambient Air Temperature For Storage:
- -40-85 °C
- Average Resistance:
- 640 Ohm at 20 °C +/- 10 %
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- China Rohs Regulation:
- X
- Net Weight:
- 0.036 kg
- Drop-Out Voltage Threshold:
- >= 0.1 Uc DC
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- Device Short Name:
- RPM
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Electrical Durability:
- 100000 cycles resistive
- Product Or Component Type:
- plug-in relay
- Warranty:
- 18 months
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Sustainable Offer Status:
- Green Premium product
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Utilisation Coefficient:
- 0.2
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Test Levels:
- level A group mounting
- Mechanical Durability:
- 10000000 cycles
- Catalog:
- View
- Datasheet:
- View
