Schneider Electric RPM22ED 15A Power Relay Led 2C/O 48Vdc Pack of 10

(No reviews yet) Write a Review
SKU:
RPM22ED
UPC:
3389119401913
Condition:
New
[Ie] Rated Operational Current:
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
Maximum Switching Capacity:
3750 VA || 420 W
Rated Operational Voltage Limits:
38.4...52.8 V DC
Device Presentation:
complete product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
X
Device Short Name:
RPM
Average Resistance:
2560 Ohm at 20 °C +/- 10 %
Contacts Material:
AgNi
Ambient Air Temperature For Operation:
-40-55 °C
Protection Category:
RT I
Ambient Air Temperature For Storage:
-40-85 °C
Sustainable Offer Status:
Green Premium product
Shock Resistance:
15 gnin operation || 30 gnnot operating
Net Weight:
0.036 kg
[Ithe] Conventional Enclosed Thermal Current:
15 A -40-55 °C
Range Of Product:
Harmony Electromechanical Relays
Maximum Switching Voltage:
250 V IEC
Load Current:
15 A 250 V AC || 15 A 28 V DC
Mechanical Durability:
10000000 cycles
Control Type:
lockable test button
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Product Or Component Type:
plug-in relay
Standards:
CSA C22.2 No 14 || UL 508 || IEC 61810-1
Contacts Type And Composition:
2 C/O
Operating Position:
any position
Reach Free Of Svhc:
Yes
Pollution Degree:
3
Operating Time:
20 ms at nominal voltage
Status Led:
with
Utilisation Coefficient:
0.2
Drop-Out Voltage Threshold:
>= 0.1 Uc DC
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
[Uc] Control Circuit Voltage:
48 V DC
Average Coil Consumption:
0.85 W
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Circularity Profile:
N/A
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Shape Of Pin:
flat
Series Name:
Power
Safety Reliability Data:
B10d = 100000
Reset Time:
20 ms at nominal voltage
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Durability:
100000 cycles resistive
Test Levels:
level A group mounting
Rohs Exemption Information:
Yes
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Product Certifications:
EAC || UL || CSA
Warranty:
18 months
Environmental Disclosure:
ENVPEP1406038EN
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Catalog:
View
Datasheet:
View
  • Schneider Electric RPM22ED 15A Power Relay Led 2C/O 48Vdc Pack of 10
  • Schneider Electric RPM22ED 15A Power Relay Led 2C/O 48Vdc Pack of 10
$83.00

Description

This Harmony RPM power plug-in relay has a coil control voltage of 48V DC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0 0 0 0
View AllClose