Schneider Electric RPM23B7 Power Relay 2 Co Without Button With Led Pack of 10

(No reviews yet) Write a Review
SKU:
RPM23B7
UPC:
3.38912E+12
Condition:
New
Product Or Component Type:
plug-in relay
Contacts Material:
AgNi
Maximum Switching Voltage:
250 V IEC
Circularity Profile:
N/A
Status Led:
with
Test Levels:
level A group mounting
Operating Time:
20 ms at nominal voltage
Control Type:
without lockable test button
Device Presentation:
complete product
[Uc] Control Circuit Voltage:
24 V AC 50/60 Hz
Dielectric Strength:
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
Safety Reliability Data:
B10d = 100000
Net Weight:
0.036 kg
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Protection Category:
RT I
Shock Resistance:
15 gnin operation || 30 gnnot operating
Warranty:
18 months
China Rohs Regulation:
X
[Ie] Rated Operational Current:
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
Depth:
39 mm
Rohs Exemption Information:
Yes
Reach Free Of Svhc:
Yes
Ip Degree Of Protection:
IP40 conforming to EN/IEC 60529
Electrical Durability:
100000 cycles resistive
Operating Position:
any position
Utilisation Coefficient:
0.2
Average Coil Consumption In Va:
1.1 60 Hz
Minimum Switching Capacity:
170 mW 10 mA, 17 V
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Ambient Air Temperature For Storage:
-40-85 °C
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Mechanical Durability:
10000000 cycles
Maximum Switching Capacity:
3750 VA || 420 W
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Pollution Degree:
3
Drop-Out Voltage Threshold:
>= 0.15 Uc AC
[Uimp] Rated Impulse Withstand Voltage:
4 kV 1.2/50 µs
Series Name:
Power
Range Of Product:
Harmony Electromechanical Relays
Rated Operational Voltage Limits:
19.2...26.4 V AC
Environmental Disclosure:
ENVPEP1406038EN
Product Certifications:
EAC || CSA || UL
Standards:
CSA C22.2 No 14 || UL 508 || EN/IEC 61810-1
Average Resistance:
177 Ohm at 20 °C +/- 15 %
[Ithe] Conventional Enclosed Thermal Current:
15 A -40-55 °C
Load Current:
15 A 250 V AC || 15 A 28 V DC
Shape Of Pin:
flat
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Device Short Name:
RPM
Ambient Air Temperature For Operation:
-40-55 °C
Contacts Type And Composition:
2 C/O
Width:
21 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Reset Time:
20 ms at nominal voltage
Sustainable Offer Status:
Green Premium product
Height:
27 mm
Catalog:
View
Datasheet:
View
  • Schneider Electric RPM23B7 Power Relay 2 Co Without Button With Led Pack of 10
  • Schneider Electric RPM23B7 Power Relay 2 Co Without Button With Led Pack of 10
$76.90

Description

The RPM range of power relays has relays from 1 to 4 poles with 15A contact rating. There is a good selection of relays sockets and accessories to choose from. This 2 pole relay has two CO contacts. Each contact has a common point and one normally ope and one normally closed contact. Contacts have UL operational current ratings of 15 A at 277 Vac and 15 A at 28 VDC. This relay is designed to be pluged into a relay socket. All wiring is connect to the relay socket terminals. Relay has a 24 VAC 50/60 Hz coil. This relay has a bipolar LED to indicate the relay status. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. Transient protection modules and hold down clips are available for this relay. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. The Harmony electromechanical relay features flexible add-on accessories like protection module, timing module, maintaining clamp and marking legend. The Harmony electromechanical relay includes interface, miniature and power relays from 1 CO to 4 CO contacts, up to 30A.
View AllClose