Schneider Electric RXM4GB1P7 Miniature Relay 4C/O Low Sw 230Vac Pack of 10

(No reviews yet) Write a Review
SKU:
RXM4GB1P7
UPC:
3389119403962
Condition:
New
Ambient Air Temperature For Storage:
-40-85 °C
Shock Resistance:
10 gnin operation || 30 gnnot operating
Minimum Switching Capacity:
15 mW 3 mA, 5 V
Reach Free Of Svhc:
Yes
Contacts Type And Composition:
4 C/O
Load Current:
3 A 250 V AC || 3 A 28 V DC
Environmental Disclosure:
ENVPEP2106019EN
Shape Of Pin:
flat
Warranty:
18 months
Average Coil Consumption In Va:
1.2-1.2 60 Hz
Sustainable Offer Status:
Green Premium product
Range Of Product:
Harmony Electromechanical Relays
Average Consumption:
1.2 VA 60 Hz
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV 1.2/50 µs
Protection Category:
RT I
Rohs Exemption Information:
Yes
Pollution Degree:
2
Status Led:
without
Net Weight:
0.037 kg
[Ithe] Conventional Enclosed Thermal Current:
3 A -40-55 °C
Rated Operational Voltage Limits:
184...253 V AC
[Uc] Control Circuit Voltage:
230 V AC 50/60 Hz
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Ambient Air Temperature For Operation:
-40-55 °C
Standards:
CSA C22.2 No 14 || IEC 61810-1 || UL 508
Control Type:
lockable test button
Electrical Durability:
100000 cycles resistive depending on mounting position and working environment
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Device Short Name:
RXM
Device Presentation:
complete product
Operating Time:
20 ms
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Maximum Switching Voltage:
250 V IEC
Contacts Material:
gold plated bifurcated silver
Drop-Out Voltage Threshold:
>= 0.15 Uc
Utilisation Coefficient:
0.2
Product Or Component Type:
plug-in relay
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Dielectric Strength:
1300 V AC between contacts with micro disconnection || 2000 V AC between coil and contact || 2000 V AC between poles
Product Certifications:
UL || Lloyd's || CE || CSA || GOST || IECEE CB Scheme
Reset Time:
20 ms
[Ie] Rated Operational Current:
2 A 28 V DC) NO IEC || 2 A 250 V AC) NO IEC || 1 A 28 V DC) NC IEC || 1 A 250 V AC) NC IEC || 3 A 28 V DC) UL || 3 A 277 V AC) UL
Series Name:
Miniature
Test Levels:
level A group mounting
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mechanical Durability:
10000000 cycles
China Rohs Regulation:
X
Operating Position:
any position
Average Resistance:
15000 Ohm 20 °C +/- 15 %
Maximum Switching Capacity:
750 VA/84 W
Circularity Profile:
ENVEOLI2106019EN
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
$73.20

Description

RXM miniature relays are part of Harmony Electromechanical Relays. This is a plug in relay to be mounted on a RXZE socket. It is a 4 C/O relay (gold plated contact) with current rating of 3A, control circuit voltage of 230 V AC 50/60 Hz. It also offers one-step loackable test button and mechanical indicator for contact status. The testbutton is activated momentarily by pushing the red pushbutton on the front and locked by flipping up the green part. The mechanical indicator is next to the testbutton, where an orange flag indicates the relay contact status. Workablity for hard-wired logic automated systems to complement the functions of industrial progammable logic controllers (PLCs). Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, motor control, PLC Interfaces, power supplies, building equipment, especially those requiring low level contacts. It is a green premium product and conforms to international standard and certifications like IEC, CE, UL, CSA, EAC, Lloyd's, RoHS and REACH. RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal). To protect against vibrations, plastic/metal clamp can be added to the socket. Protection modules and marking legend are also available. It is sold in lots of 10 and reference includes relay only. The RXM plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and available with 2 CO (12A), 3 CO (10A), 4 CO (6A) contacts, 4 CO (3A) low level contacts.
View AllClose