Schneider Electric RXM4GB2ED Miniature Relay Led 4C/O Low Sw 48Vdc Pack of 10

(No reviews yet) Write a Review
SKU:
RXM4GB2ED
UPC:
3389119404006
Condition:
New
Mechanical Durability:
10000000 cycles
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circularity Profile:
ENVEOLI2106019EN
Test Levels:
level A group mounting
Product Or Component Type:
plug-in relay
Reach Free Of Svhc:
Yes
Operating Time:
20 ms
Net Weight:
0.037 kg
Contacts Type And Composition:
4 C/O
Protection Category:
RT I
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Minimum Switching Capacity:
15 mW 3 mA, 5 V
Range Of Product:
Harmony Electromechanical Relays
Ambient Air Temperature For Storage:
-40-85 °C
Device Short Name:
RXM
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Reset Time:
20 ms
Series Name:
Miniature
Status Led:
with
Utilisation Coefficient:
0.2
[Ithe] Conventional Enclosed Thermal Current:
3 A -40-55 °C
China Rohs Regulation:
X
Dielectric Strength:
1300 V AC between contacts with micro disconnection || 2000 V AC between coil and contact || 2000 V AC between poles
Control Type:
lockable test button
Standards:
IEC 61810-1 || CSA C22.2 No 14 || UL 508
Ambient Air Temperature For Operation:
-40-55 °C
Product Certifications:
UL || Lloyd's || CE || CSA || GOST || IECEE CB Scheme
Average Resistance:
2560 Ohm 20 °C +/- 10 %
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Electrical Durability:
100000 cycles resistive depending on mounting position and working environment
Shock Resistance:
10 gnin operation || 30 gnnot operating
Operating Position:
any position
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV 1.2/50 µs
[Uc] Control Circuit Voltage:
48 V DC
Rohs Exemption Information:
Yes
Shape Of Pin:
flat
Device Presentation:
complete product
Sustainable Offer Status:
Green Premium product
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Rated Operational Voltage Limits:
38.4...52.8 V DC
Contacts Material:
gold plated bifurcated silver
Warranty:
18 months
Drop-Out Voltage Threshold:
>= 0.1 Uc
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Disclosure:
ENVPEP2106019EN
[Ie] Rated Operational Current:
2 A 28 V DC) NO IEC || 2 A 250 V AC) NO IEC || 1 A 28 V DC) NC IEC || 1 A 250 V AC) NC IEC || 3 A 28 V DC) UL || 3 A 277 V AC) UL
Pollution Degree:
2
Maximum Switching Voltage:
250 V IEC
Maximum Switching Capacity:
750 VA/84 W
Average Coil Consumption:
0.9 W
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Load Current:
3 A 250 V AC || 3 A 28 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
$124.50

Description

RXM miniature relays are part of Harmony Electromechanical Relays. This is a plug in relay to be mounted on a RXZE socket. It is a 4 C/O relay (gold plated contact) with current rating of 3A, control circuit voltage of 48 V DC. It also offers one-step loackable test button and mechanical indicator for contact status. The testbutton is activated momentarily by pushing the blue pushbutton on the front and locked by flipping up the green part. The mechanical indicator is next to the testbutton, where an orange flag indicates the relay contact status. A green LED on the front will illuminate when the relay is on. Status display with LED: clearly signal both in the day and night. Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, motor control, PLC Interfaces, power supplies, building equipment, especially those requiring low level contacts. It is a green premium product and conforms to international standard and certifications like IEC, CE, UL, CSA, EAC, Lloyd's, RoHS and REACH. RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal). To protect against vibrations, plastic/metal clamp can be added to the socket. Protection modules and marking legend are also available. It is sold in lots of 10 and reference includes relay only. The RXM plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and available with 2 CO (12A), 3 CO (10A), 4 CO (6A) contacts, 4 CO (3A) low level contacts.
View AllClose