Schneider Electric

Schneider Electric SD326RU25S2 Lexium Step Driver (Pulse/Dir.,Rm), 2.5A

(No reviews yet) Write a Review
SKU:
SD326RU25S2
UPC:
3389119224338
Condition:
New
Device Short Name:
SD326
Rohs Exemption Information:
Yes
Net Weight:
1.1 kg
Range Of Product:
Lexium SD3
Output Voltage:
<= 30 V 24 V output signals) || 4.75...5.25 V ENC+5V_OUT signal output)
Maximum Motor Phase Current:
2.5 A
Depth:
140 mm
Nominal Power:
180 W 115 V || 270 W 230 V
Overvoltage Category:
III
Maximum Input Frequency:
200 kHz 24 V optocoupler input signals || 200 kHz 5 V optocoupler input signals || 400 kHz ENC_A/ENC_B signal input
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Network Frequency Limits:
50-60 Hz - 15...10 %)
Physical Interface:
RS422 - ENC_A/ENC_B signal input
Supply Voltage Limits:
200-240 V || 100-120 V
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Input Current:
25 mA 5 V optocoupler input signals || 7 mA 24 V optocoupler input signals
Phase:
single phase
Height:
145 mm
Vibration Resistance:
1 gn 13-150 Hz)IEC 60068-2-6 || 1.5 mm 3-13 Hz)IEC 60068-2-6
Electromagnetic Compatibility:
electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5
Inrush Current:
60 A
Type Of Cooling:
natural convection
Environmental Disclosure:
ENVPEP111115EN
Mercury Free:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) without derating maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm)
Communication Interface:
pulse/direction, Integrated
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...230 V - 15...10 %
Voltage State 0 Guaranteed:
<= 5 V 24 V optocoupler input signals || <= 0.5 V 5 V optocoupler input signals
Associated Fuse Rating:
6 A 115 V || 6 A 230 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Short-Circuit Current:
0.5 kA
Product Or Component Type:
motion stepper drive
Pollution Degree:
level 2
Input Voltage:
24 V -15 %/+20 % 24 V control voltage
Current Consumption:
<= 0.2 mA 24 V control voltage
Ambient Air Temperature For Storage:
-25-70 °C
China Rohs Regulation:
X
Ambient Air Temperature For Operation:
0-40 °C UL || 0-50 °C
Standards:
IEC 61800-5-1 || IEC 61800-3 || EN/IEC 61800-3 environment 2 || IEC 61800-3 environment 1 || IEC 50178
Voltage State 1 Guaranteed:
15...30 V 24 V optocoupler input signals || 2.5...5.25 V 5 V optocoupler input signals
Maximum Switching Voltage:
30 V DC readiness signal output)
Ip Degree Of Protection:
IP20 || on upper part: IP40 (without removal of protective film)
Format Of The Drive:
block
Sustainable Offer Status:
Green Premium product
Residual Ripple:
<= 5 % 24 V control voltage)
Maximum Voltage Drop:
<1 V 50 mA load 24 V output signals || <1 V 50 mA load ENC+5V_OUT signal output || <1 V 50 mA load readiness signal output
Width:
72 mm
Circularity Profile:
ENVEOLI111103EN
Maximum Switching Current:
200 mA readiness signal output) || 50 mA 24 V output signals)RM-FAULT_OUT || 1.7 mA 24 V output signals)+BRAKE_OUT
Maximum Mechanical Speed:
3000 rpm
Supply Voltage Type:
AC/DC
Maximum Leakage Current:
30 mA IEC 60990-3
Function Available:
rotation monitoring || holding brake monitoring
Relative Humidity:
5-85 % without condensation
Marking:
CE
Product Certifications:
UL || cUL
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Pvc Free:
Yes
Catalog:
View
Datasheet:
View
$924.69

Description

This product is part of the Lexium SD3 range, an offer of stepper motors for motion control. The 3-phase stepper motor drive with an integrated pulse/direction communication interface. It is a motor drive with a rated supply voltage of 100V to 120V, 200V to 240V, a maximum motor phase current of 2.5A, a nominal power of 180W at 115V, 270W at 230V. It features natural convection cooling. The maximum mechanical speed of motor drive is 3000RPM. It is an IP20 and IP40 rated product. Its dimensions are 72mm (width) x 140mm (depth) x 145mm (height). It weighs 1.1kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, food and beverage applications. This product is certified by CE, CUL and UL. It meets EN/IEC 61800-5-1, EN/IEC 61800-3, EN/IEC 61800-3 environment 1/2 and EN/IEC 50178 standards. The SD3 is a universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Lexium SD3, three-phase range up to 19.7Nm with high accuracy and high torque at low rotation speeds.
View AllClose