Schneider Electric SH30701P11A1100 Sh3 Motor 070.1 Key Sgl Str Ip65
SKU:
SH30701P11A1100
UPC:
3606481971524
MPN:
Condition:
New
Length:
154 mm
Mercury Free:
Yes
Shaft Diameter:
11 mm
Mounting Holes Diameter:
5.5 mm
[Us] Rated Supply Voltage:
115...480 V
Nominal Torque:
1.4 N.m 115 V single phase || 1.4 N.m 230 V single phase || 1.1 N.m 400 V three phase || 1.1 N.m 480 V three phase
Shaft End:
parallel key
Maximum Axial Force Fa:
80 N
Encoder Type:
absolute single turn SinCos Hiperface
Environmental Disclosure:
ENVPEP111049EN
Electrical Connection:
rotatable right angled connector
Key Width:
4 mm
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Number Of Mounting Holes:
4
Centring Collar Depth:
2.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
China Rohs Regulation:
X
Speed Feedback Resolution:
128 periods
Nominal Output Power:
220 W 115 V single phase || 440 W 230 V single phase || 820 W 400 V three phase || 950 W 480 V three phase
Stator Resistance:
10.4 Ohm
Sustainable Offer Status:
Green Premium product
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Rohs Exemption Information:
Yes
Torque Constant:
0.69 N.m/A 120 °C
Circularity Profile:
N/A
Stator Inductance:
60.25 mH
Maximum Mechanical Speed:
8000 rpm
Continuous Stall Current:
1.8 A
Motor Flange Size:
70 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Current Irms:
5.7 A
Continuous Power:
690 W
Back Emf Constant:
46 V/krpm 20 °C
Net Weight:
2.1 kg
Shaft Length:
23 mm
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Pvc Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Compatibility:
PacDrive 3
Rotor Inertia:
0.25 kg.cm²
Phase:
three phase
Peak Stall Torque:
3.5 N.m 115...480 V three phase
Number Of Motor Poles:
3
Continuous Stall Torque:
1.25 N.m 115...480 V three phase
Circle Diameter Of The Mounting Holes:
82 mm
Holding Brake:
without
Warranty:
18 months
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Centring Collar Diameter:
60 mm
Mounting Support:
international standard flange
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
