Schneider Electric SH30702P12A1100 Sh3 Motor 070.2 Key Mlt Str Ip65
SKU:
SH30702P12A1100
UPC:
3.60648E+12
MPN:
Condition:
New
Length:
187 mm
Mounting Holes Diameter:
5.5 mm
Shaft End:
parallel key
Motor Flange Size:
70 mm
Warranty:
18 months
Range Compatibility:
PacDrive 3
Type Of Cooling:
natural convection
Mercury Free:
Yes
Centring Collar Diameter:
60 mm
Electrical Connection:
rotatable right angled connector
Torque Constant:
0.7 N.m/A 120 °C
Peak Stall Torque:
7.6 N.m 115...480 V three phase
Net Weight:
2.8 kg
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Mounting Holes:
4
Phase:
three phase
Centring Collar Depth:
2.5 mm
Holding Brake:
without
Nominal Torque:
2.15 N.m 115 V single phase || 2.1 N.m 230 V single phase || 1.8 N.m 400 V three phase || 1.8 N.m 480 V three phase
Back Emf Constant:
48 V/krpm 20 °C
Key Width:
4 mm
Shaft Diameter:
11 mm
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
80 N
Continuous Stall Current:
2.9 A
Product Or Component Type:
servo motor
Encoder Type:
absolute multiturn SinCos Hiperface
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Stator Resistance:
4.2 Ohm
Sustainable Offer Status:
Green Premium product
Continuous Stall Torque:
2.04 N.m 115...480 V three phase
Nominal Output Power:
340 W 115 V single phase || 660 W 230 V single phase || 1190 W 400 V three phase || 1360 W 480 V three phase
Number Of Motor Poles:
3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Power:
1130 W
China Rohs Regulation:
X
Speed Feedback Resolution:
128 periods
Device Short Name:
SH3.....P
[Us] Rated Supply Voltage:
115...480 V
Environmental Disclosure:
ENVPEP111049EN
Maximum Mechanical Speed:
8000 rpm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Maximum Current Irms:
11.8 A
Pvc Free:
Yes
Circularity Profile:
N/A
Mounting Support:
international standard flange
Rotor Inertia:
0.41 kg.cm²
Stator Inductance:
29.65 mH
Circle Diameter Of The Mounting Holes:
82 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
