Schneider Electric SH30702P12A1200 Sh3 Motor 070.2 Key Mlt Str Ip65

(No reviews yet) Write a Review
SKU:
SH30702P12A1200
UPC:
3.60648E+12
Condition:
New
Sustainable Offer Status:
Green Premium product
Electrical Connection:
rotatable right angled connector
Type Of Cooling:
natural convection
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Depth:
2.5 mm
Nominal Output Power:
340 W 115 V single phase || 660 W 230 V single phase || 1190 W 400 V three phase || 1360 W 480 V three phase
Back Emf Constant:
48 V/krpm 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Stall Current:
2.9 A
Net Weight:
2.8 kg
Shaft End:
parallel key
Maximum Axial Force Fa:
80 N
Shaft Diameter:
11 mm
Warranty:
18 months
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Power:
1130 W
Maximum Mechanical Speed:
8000 rpm
Rohs Exemption Information:
Yes
Stator Resistance:
4.2 Ohm
Circularity Profile:
N/A
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Motor Flange Size:
70 mm
Number Of Mounting Holes:
4
Number Of Motor Poles:
3
Environmental Disclosure:
ENVPEP111049EN
Stator Inductance:
29.65 mH
Continuous Stall Torque:
2.04 N.m 115...480 V three phase
Maximum Current Irms:
11.8 A
Holding Brake:
without
Product Or Component Type:
servo motor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
international standard flange
Centring Collar Diameter:
60 mm
Key Width:
4 mm
Pvc Free:
Yes
Mounting Holes Diameter:
5.5 mm
Length:
187 mm
Shaft Length:
23 mm
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5 || housing IP67 EN/IEC 60034-5
Range Compatibility:
PacDrive 3
Peak Stall Torque:
7.6 N.m 115...480 V three phase
Circle Diameter Of The Mounting Holes:
82 mm
Rotor Inertia:
0.41 kg.cm²
Nominal Torque:
2.15 N.m 115 V single phase || 2.1 N.m 230 V single phase || 1.8 N.m 400 V three phase || 1.8 N.m 480 V three phase
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
China Rohs Regulation:
X
Torque Constant:
0.7 N.m/A 120 °C
Mercury Free:
Yes
[Us] Rated Supply Voltage:
115...480 V
Speed Feedback Resolution:
128 periods
Device Short Name:
SH3.....P
  • Schneider Electric SH30702P12A1200 Sh3 Motor 070.2 Key Mlt Str Ip65
  • Schneider Electric SH30702P12A1200 Sh3 Motor 070.2 Key Mlt Str Ip65
$2,075.94