Schneider Electric SH30703P11A1000 Sh3 Motor 070.3 Key Sgl Str Ip54
SKU:
SH30703P11A1000
UPC:
3.60648E+12
MPN:
Condition:
New
Centring Collar Diameter:
60 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Length:
30 mm
Circularity Profile:
N/A
Maximum Axial Force Fa:
80 N
Rotor Inertia:
0.58 kg.cm²
Number Of Mounting Holes:
4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pvc Free:
Yes
Maximum Current Irms:
17 A
Holding Brake:
without
Shaft Diameter:
14 mm
Maximum Mechanical Speed:
8000 rpm
Mounting Support:
international standard flange
Key Width:
5 mm
Continuous Power:
1330 W
Length:
220 mm
Shaft End:
parallel key
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Centring Collar Depth:
2.5 mm
Warranty:
18 months
Rohs Exemption Information:
Yes
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Stator Resistance:
2.7 Ohm
Type Of Cooling:
natural convection
Environmental Disclosure:
ENVPEP111049EN
Product Or Component Type:
servo motor
Range Compatibility:
PacDrive 3
Encoder Type:
absolute single turn SinCos Hiperface
[Us] Rated Supply Voltage:
115...480 V
Net Weight:
3.6 kg
Torque Constant:
0.72 N.m/A 120 °C
Speed Feedback Resolution:
128 periods
Circle Diameter Of The Mounting Holes:
82 mm
Device Short Name:
SH3.....P
Electrical Connection:
rotatable right angled connector
Phase:
three phase
Mercury Free:
Yes
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Mounting Holes Diameter:
5.5 mm
Number Of Motor Poles:
3
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Motor Flange Size:
70 mm
China Rohs Regulation:
X
Back Emf Constant:
49 V/krpm 20 °C
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Sustainable Offer Status:
Green Premium product
Stator Inductance:
20.3 mH
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
