Schneider Electric SH30703P11F1000 Sh3 Motor 070.3 Key Sgl Brk Str Ip54
SKU:
SH30703P11F1000
UPC:
3.60648E+12
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft End:
parallel key
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Maximum Current Irms:
17 A
Pvc Free:
Yes
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Warranty:
18 months
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Mercury Free:
Yes
Length:
254 mm
Key Width:
5 mm
Sustainable Offer Status:
Green Premium product
Number Of Motor Poles:
3
Mounting Support:
international standard flange
Motor Flange Size:
70 mm
Device Short Name:
SH3.....P
Net Weight:
3.8 kg
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Stator Inductance:
20.3 mH
Back Emf Constant:
49 V/krpm 20 °C
Maximum Mechanical Speed:
8000 rpm
Centring Collar Depth:
2.5 mm
Environmental Disclosure:
ENVPEP111049EN
Speed Feedback Resolution:
128 periods
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 IEC 60034-5 || motor IP65 IEC 60034-5 || shaft bushing IP65 IEC 60034-5
[Us] Rated Supply Voltage:
115...480 V
Mounting Holes Diameter:
5.5 mm
Shaft Diameter:
14 mm
Torque Constant:
0.72 N.m/A 120 °C
Encoder Type:
absolute single turn SinCos Hiperface
Centring Collar Diameter:
60 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circle Diameter Of The Mounting Holes:
82 mm
Shaft Length:
30 mm
Electrical Connection:
rotatable right angled connector
Continuous Power:
1330 W
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Continuous Stall Current:
4.1 A
Rohs Exemption Information:
Yes
Holding Brake:
with
Holding Torque:
3 N.m
Phase:
three phase
Maximum Axial Force Fa:
80 N
Product Or Component Type:
servo motor
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
