Schneider Electric SH30703P12A1000 Sh3 Motor 070.3 Key Mlt Str Ip54
SKU:
SH30703P12A1000
UPC:
3.60648E+12
MPN:
Condition:
New
Stator Resistance:
2.7 Ohm
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
SH3.....P
Circle Diameter Of The Mounting Holes:
82 mm
Rotor Inertia:
0.58 kg.cm²
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
China Rohs Regulation:
X
Type Of Cooling:
natural convection
Circularity Profile:
N/A
Speed Feedback Resolution:
128 periods
Continuous Power:
1330 W
Environmental Disclosure:
ENVPEP111049EN
Encoder Type:
absolute multiturn SinCos Hiperface
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Torque Constant:
0.72 N.m/A 120 °C
Key Width:
5 mm
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Electrical Connection:
straight connector
Centring Collar Depth:
2.5 mm
Shaft End:
parallel key
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
three phase
Maximum Axial Force Fa:
80 N
Sustainable Offer Status:
Green Premium product
Range Compatibility:
PacDrive 3
Motor Flange Size:
70 mm
Length:
220 mm
Mounting Support:
international standard flange
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Number Of Mounting Holes:
4
Number Of Motor Poles:
3
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Pvc Free:
Yes
Shaft Diameter:
14 mm
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Continuous Stall Current:
4.1 A
Mounting Holes Diameter:
5.5 mm
Maximum Mechanical Speed:
8000 rpm
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Net Weight:
3.6 kg
Shaft Length:
30 mm
Rohs Exemption Information:
Yes
Product Or Component Type:
servo motor
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
