Schneider Electric SH30703P12F1000 Sh3 Motor 070.3 Key Mlt Brk Str Ip54
SKU:
SH30703P12F1000
UPC:
3606481972101
MPN:
Condition:
New
Environmental Disclosure:
ENVPEP111049EN
Number Of Motor Poles:
3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
three phase
Torque Constant:
0.72 N.m/A 120 °C
Mounting Support:
international standard flange
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 IEC 60034-5 || motor IP65 IEC 60034-5 || shaft bushing IP65 IEC 60034-5
Centring Collar Depth:
2.5 mm
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Holding Torque:
3 N.m
Encoder Type:
absolute multiturn SinCos Hiperface
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Back Emf Constant:
49 V/krpm 20 °C
Speed Feedback Resolution:
128 periods
Holding Brake:
with
Sustainable Offer Status:
Green Premium product
Mercury Free:
Yes
Device Short Name:
SH3.....P
Shaft Length:
30 mm
Stator Inductance:
20.3 mH
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Range Compatibility:
PacDrive 3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Warranty:
18 months
Continuous Power:
1330 W
China Rohs Regulation:
X
Shaft Diameter:
14 mm
Mounting Holes Diameter:
5.5 mm
Stator Resistance:
2.7 Ohm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
115...480 V
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Centring Collar Diameter:
60 mm
Maximum Current Irms:
17 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Type Of Cooling:
natural convection
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Shaft End:
parallel key
Electrical Connection:
straight connector
Net Weight:
3.8 kg
Rotor Inertia:
0.807 kg.cm²
Motor Flange Size:
70 mm
Circle Diameter Of The Mounting Holes:
82 mm
Continuous Stall Current:
4.1 A
Pvc Free:
Yes
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
