Schneider Electric SH31001P02A1000 Sh3 Motor 100.1 Mlt Str Ip54
SKU:
SH31001P02A1000
UPC:
3606481972194
MPN:
Condition:
New
Nominal Output Power:
410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
Number Of Motor Poles:
4
Warranty:
18 months
Range Compatibility:
PacDrive 3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor
Speed Feedback Resolution:
128 periods
Shaft Length:
40 mm
Stator Resistance:
3.8 Ohm
Mounting Holes Diameter:
9.0 mm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Centring Collar Depth:
3.5 mm
Device Short Name:
SH3.....P
Sustainable Offer Status:
Green Premium product
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Diameter:
19 mm
Net Weight:
4.3 kg
Circle Diameter Of The Mounting Holes:
115 mm
Mercury Free:
Yes
Maximum Current Irms:
0
Stator Inductance:
27.15 mH
China Rohs Regulation:
X
Rotor Inertia:
1.4 kg.cm²
Phase:
three phase
Continuous Stall Current:
3.5 A
Mounting Support:
international standard flange
Pvc Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
Type Of Cooling:
natural convection
Electrical Connection:
straight connector
Torque Constant:
0.84 N.m/A 120 °C
Back Emf Constant:
60 V/krpm 20 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Rohs Exemption Information:
Yes
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Centring Collar Diameter:
95 mm
Nominal Torque:
2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
Encoder Type:
absolute multiturn SinCos Hiperface
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical...
