Schneider Electric SH31001P11A1000 Sh3 Motor 100.1 Key Sgl Str Ip54
SKU:
SH31001P11A1000
UPC:
3606481972231
MPN:
Condition:
New
Stator Resistance:
3.8 Ohm
Nominal Torque:
2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
Mounting Support:
international standard flange
Key Width:
6 mm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
China Rohs Regulation:
X
Centring Collar Diameter:
95 mm
Maximum Current Irms:
0
Number Of Motor Poles:
4
Device Short Name:
SH3.....P
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Stall Current:
3.5 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Power:
1190 W
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Maximum Mechanical Speed:
6000 rpm
Rohs Exemption Information:
Yes
Net Weight:
4.3 kg
Length:
168.5 mm
Speed Feedback Resolution:
128 periods
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Mounting Holes Diameter:
9.0 mm
[Us] Rated Supply Voltage:
115...480 V
Shaft Diameter:
19 mm
Warranty:
18 months
Holding Brake:
without
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Peak Stall Torque:
9.6 N.m 115...480 V three phase
Encoder Type:
absolute single turn SinCos Hiperface
Maximum Axial Force Fa:
160 N
Rotor Inertia:
1.4 kg.cm²
Pvc Free:
Yes
Range Compatibility:
PacDrive 3
Product Or Component Type:
servo motor
Stator Inductance:
27.15 mH
Shaft Length:
40 mm
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury Free:
Yes
Back Emf Constant:
60 V/krpm 20 °C
Torque Constant:
0.84 N.m/A 120 °C
Centring Collar Depth:
3.5 mm
Motor Flange Size:
100 mm
Circle Diameter Of The Mounting Holes:
115 mm
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Electrical Connection:
straight connector
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Phase:
three phase
Shaft End:
parallel key
Nominal Output Power:
410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and parallel key shaft end...
