- Mounting Holes Diameter:
- 9.0 mm
- Maximum Axial Force Fa:
- 160 N
- Mounting Support:
- international standard flange
- Encoder Type:
- absolute multiturn SinCos Hiperface
- [Us] Rated Supply Voltage:
- 115...480 V
- Circularity Profile:
- N/A
- Centring Collar Depth:
- 3.5 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Continuous Stall Torque:
- 2.94 N.m 115...480 V three phase
- Pvc Free:
- Yes
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5 || housing IP67 EN/IEC 60034-5
- Speed Feedback Resolution:
- 128 periods
- Number Of Motor Poles:
- 4
- Shaft Length:
- 40 mm
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Shaft Diameter:
- 19 mm
- China Rohs Regulation:
- X
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Motor Flange Size:
- 100 mm
- Phase:
- three phase
- Mercury Free:
- Yes
- Maximum Current Irms:
- 0
- Length:
- 168.5 mm
- Continuous Stall Current:
- 3.5 A
- Continuous Power:
- 1190 W
- Torque Constant:
- 0.84 N.m/A 120 °C
- Peak Stall Torque:
- 9.6 N.m 115...480 V three phase
- Back Emf Constant:
- 60 V/krpm 20 °C
- Maximum Radial Force Fr:
- 900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
- Stator Inductance:
- 27.15 mH
- Rohs Exemption Information:
- Yes
- Number Of Mounting Holes:
- 4
- Maximum Mechanical Speed:
- 6000 rpm
- Net Weight:
- 4.3 kg
- Range Compatibility:
- PacDrive 3
- Shaft End:
- parallel key
- Environmental Disclosure:
- ENVPEP111049EN
- Holding Brake:
- without
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Device Short Name:
- SH3.....P
- Nominal Output Power:
- 410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
- Stator Resistance:
- 3.8 Ohm
- Sustainable Offer Status:
- Green Premium product
- Type Of Cooling:
- natural convection
- Centring Collar Diameter:
- 95 mm
- Electrical Connection:
- straight connector
- Rotor Inertia:
- 1.4 kg.cm²
- Nominal Speed:
- 1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
- Key Width:
- 6 mm
- Warranty:
- 18 months
- Nominal Torque:
- 2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
- Product Or Component Type:
- servo motor