Schneider Electric SH31404P02F2000 Sh3 Motor 140.4 Mlt Brk Ang Ip54
SKU:
SH31404P02F2000
UPC:
3606485298177
MPN:
Condition:
New
Availability:
Schneider orders under $1250 will incur a $60 processing fee at checkout
Shaft Length:
50 mm
Length:
420.5 mm
Torque Constant:
1.57 N.m/A 120 °C
Centring Collar Depth:
3.5 mm
Maximum Current Irms:
95.6 A
Holding Torque:
36 N.m
Number Of Motor Poles:
5
Range Compatibility:
PacDrive 3
Net Weight:
27.8 kg
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Continuous Power:
4040 W
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Circle Diameter Of The Mounting Holes:
165 mm
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
China Rohs Regulation:
X
Stator Inductance:
5.945 mH
Mounting Support:
international standard flange
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Continuous Stall Current:
21.3 A
Rohs Exemption Information:
Yes
Product Or Component Type:
servo motor
Peak Stall Torque:
131.9 N.m 115...480 V three phase
Speed Feedback Resolution:
128 periods
Shaft Diameter:
24 mm
Environmental Disclosure:
ENVPEP111049EN
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Back Emf Constant:
104 V/krpm 20 °C
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Electrical Connection:
rotatable right angled connector
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
[Us] Rated Supply Voltage:
115...480 V
Mercury Free:
Yes
Shaft End:
smooth shaft
Maximum Mechanical Speed:
4000 rpm
Stator Resistance:
0.28 Ohm
Number Of Mounting Holes:
4
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Motor Flange Size:
140 mm
Holding Brake:
with
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
Mounting Holes Diameter:
11 mm
Rotor Inertia:
29.2 kg.cm²
Centring Collar Diameter:
130 mm
Device Short Name:
SH3.....P
Warranty:
18 months
Pvc Free:
Yes
Circularity Profile:
N/A
Maximum Axial Force Fa:
300 N
Encoder Type:
absolute multiturn SinCos Hiperface
Phase:
three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and smooth shaft end with...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and smooth shaft end with...
