Schneider Electric SH31404P11A1000 Sh3 Motor 140.4 Key Sgl Str Ip54
SKU:
SH31404P11A1000
UPC:
3.60648E+12
MPN:
Condition:
New
Continuous Stall Current:
21.3 A
Mercury Free:
Yes
Centring Collar Depth:
3.5 mm
Rotor Inertia:
23.7 kg.cm²
Rohs Exemption Information:
Yes
Sustainable Offer Status:
Green Premium product
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Encoder Type:
absolute single turn SinCos Hiperface
Speed Feedback Resolution:
128 periods
Stator Resistance:
0.28 Ohm
Mounting Holes Diameter:
11 mm
Number Of Mounting Holes:
4
Net Weight:
26 kg
Centring Collar Diameter:
130 mm
Product Or Component Type:
servo motor
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Type Of Cooling:
natural convection
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
Continuous Power:
4040 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
China Rohs Regulation:
X
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Holding Brake:
without
Device Short Name:
SH3.....P
Maximum Mechanical Speed:
4000 rpm
Torque Constant:
1.57 N.m/A 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft Length:
50 mm
Back Emf Constant:
104 V/krpm 20 °C
Circularity Profile:
N/A
Range Compatibility:
PacDrive 3
Environmental Disclosure:
ENVPEP111049EN
Maximum Current Irms:
95.6 A
Mounting Support:
international standard flange
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Key Width:
8 mm
Number Of Motor Poles:
5
Shaft End:
parallel key
Warranty:
18 months
Electrical Connection:
straight connector
Stator Inductance:
5.945 mH
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Motor Flange Size:
140 mm
Maximum Axial Force Fa:
300 N
Length:
382.5 mm
Circle Diameter Of The Mounting Holes:
165 mm
Phase:
three phase
Peak Stall Torque:
131.9 N.m 115...480 V three phase
[Us] Rated Supply Voltage:
115...480 V
Shaft Diameter:
24 mm
Pvc Free:
Yes
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
