Schneider Electric SH31404P12F1000 Sh3 Motor 140.4 Key Mlt Brk Str Ip54
SKU:
SH31404P12F1000
UPC:
3606481973184
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Diameter:
24 mm
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Electrical Connection:
straight connector
Sustainable Offer Status:
Green Premium product
Mounting Holes Diameter:
11 mm
Centring Collar Depth:
3.5 mm
Maximum Current Irms:
95.6 A
Mercury Free:
Yes
Key Width:
8 mm
Net Weight:
27.8 kg
Phase:
three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Holding Brake:
with
Product Or Component Type:
servo motor
Number Of Motor Poles:
5
Rotor Inertia:
29.2 kg.cm²
Warranty:
18 months
Circularity Profile:
N/A
Pvc Free:
Yes
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Stator Inductance:
5.945 mH
Circle Diameter Of The Mounting Holes:
165 mm
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Shaft End:
parallel key
[Us] Rated Supply Voltage:
115...480 V
Continuous Power:
4040 W
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
Environmental Disclosure:
ENVPEP111049EN
Continuous Stall Current:
21.3 A
Motor Flange Size:
140 mm
Back Emf Constant:
104 V/krpm 20 °C
Type Of Cooling:
natural convection
Mounting Support:
international standard flange
Device Short Name:
SH3.....P
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Holding Torque:
36 N.m
Maximum Axial Force Fa:
300 N
Centring Collar Diameter:
130 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
