Schneider Electric

Schneider Electric SH32051P02F1000 Sh3 Motor 205.1 Mlt Brk Str Ip54

SKU:

SH32051P02F1000

UPC:

3.60648E+12

MPN:

Condition:

New

Device Short Name:

SH3.....P

Pvc Free:

Yes

Circle Diameter Of The Mounting Holes:

215 mm

Mounting Support:

international standard flange

Centring Collar Diameter:

180 mm

Environmental Disclosure:

ENVPEP111049EN

Warranty:

18 months

Shaft Diameter:

38 mm

Maximum Axial Force Fa:

740 N

[Us] Rated Supply Voltage:

115...480 V

Holding Torque:

80 N.m

Circularity Profile:

N/A

Continuous Power:

5500 W

Stator Resistance:

0.3 Ohm

Stator Inductance:

8.7 mH

Centring Collar Depth:

4 mm

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Back Emf Constant:

104 V/krpm 20 °C

Maximum Radial Force Fr:

3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm

Peak Stall Torque:

110 N.m 115...480 V three phase

Length:

370.5 mm

Range Compatibility:

PacDrive 3

Ip Degree Of Protection:

shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5

Electrical Connection:

straight connector

Maximum Current Irms:

87.2 A

Holding Brake:

with

Mercury Free:

Yes

Type Of Cooling:

natural convection

Nominal Output Power:

2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase

Maximum Mechanical Speed:

3800 rpm

Rotor Inertia:

87.4 kg.cm²

Nominal Torque:

31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase

Product Or Component Type:

servo motor

Continuous Stall Torque:

36.9 N.m 115...480 V three phase

Rohs Exemption Information:

Yes

Motor Flange Size:

205 mm

Net Weight:

38.6 kg

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Phase:

three phase

Sustainable Offer Status:

Green Premium product

China Rohs Regulation:

X

Shaft Length:

80 mm

Encoder Type:

absolute multiturn SinCos Hiperface

Shaft End:

smooth shaft

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Number Of Motor Poles:

5

Number Of Mounting Holes:

4

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Speed Feedback Resolution:

128 periods

Torque Constant:

1.6 N.m/A 120 °C

Mounting Holes Diameter:

14 mm

Nominal Speed:

750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase

Continuous Stall Current:

21 A

Catalog:

View

Datasheet:

View