Schneider Electric SH32051P11A1000 Sh3 Motor 205.1 Key Sgl Str Ip54
SKU:
SH32051P11A1000
UPC:
3606481973252
MPN:
Condition:
New
Electrical Connection:
rotatable right angled connector
Shaft End:
parallel key
Key Width:
10 mm
Motor Flange Size:
205 mm
Mounting Holes Diameter:
14 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rotor Inertia:
71.4 kg.cm²
Product Or Component Type:
servo motor
Continuous Stall Torque:
36.9 N.m 115...480 V three phase
Maximum Mechanical Speed:
3800 rpm
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Shaft Diameter:
38 mm
Circle Diameter Of The Mounting Holes:
215 mm
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Device Short Name:
SH3.....P
China Rohs Regulation:
X
Maximum Radial Force Fr:
3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
Phase:
three phase
[Us] Rated Supply Voltage:
115...480 V
Peak Stall Torque:
110 N.m 115...480 V three phase
Stator Inductance:
8.7 mH
Centring Collar Diameter:
180 mm
Encoder Type:
absolute single turn SinCos Hiperface
Continuous Stall Current:
21 A
Maximum Current Irms:
87.2 A
Continuous Power:
5500 W
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Type Of Cooling:
natural convection
Mounting Support:
international standard flange
Holding Brake:
without
Torque Constant:
1.6 N.m/A 120 °C
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Nominal Torque:
31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase
Nominal Output Power:
2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase
Shaft Length:
80 mm
Back Emf Constant:
104 V/krpm 20 °C
Number Of Motor Poles:
5
Stator Resistance:
0.3 Ohm
Speed Feedback Resolution:
128 periods
Net Weight:
35 kg
Centring Collar Depth:
4 mm
Circularity Profile:
N/A
Length:
321 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Compatibility:
PacDrive 3
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
