Schneider Electric SH32051P11A2100 Sh3 Motor 205.1 Key Sgl Ang Ip65
SKU:
SH32051P11A2100
UPC:
3606481973276
MPN:
Condition:
New
Centring Collar Depth:
4 mm
Continuous Power:
5500 W
Type Of Cooling:
natural convection
Continuous Stall Current:
21 A
Encoder Type:
absolute single turn SinCos Hiperface
Maximum Axial Force Fa:
740 N
Stator Resistance:
0.3 Ohm
Centring Collar Diameter:
180 mm
Length:
321 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury Free:
Yes
Mounting Support:
international standard flange
Number Of Motor Poles:
5
Key Width:
10 mm
Motor Flange Size:
205 mm
Circle Diameter Of The Mounting Holes:
215 mm
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Shaft Length:
80 mm
Electrical Connection:
straight connector
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mounting Holes Diameter:
14 mm
China Rohs Regulation:
X
Nominal Output Power:
2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Or Component Type:
servo motor
Torque Constant:
1.6 N.m/A 120 °C
[Us] Rated Supply Voltage:
115...480 V
Maximum Mechanical Speed:
3800 rpm
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Phase:
three phase
Holding Brake:
without
Shaft End:
parallel key
Warranty:
18 months
Rotor Inertia:
71.4 kg.cm²
Maximum Current Irms:
87.2 A
Net Weight:
35 kg
Speed Feedback Resolution:
128 periods
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
N/A
Back Emf Constant:
104 V/krpm 20 °C
Stator Inductance:
8.7 mH
Nominal Torque:
31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase
Shaft Diameter:
38 mm
Maximum Radial Force Fr:
3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
