Schneider Electric SH32053P02F1000 Sh3 Motor 205.3 Mlt Brk Str Ip54
SKU:
SH32053P02F1000
UPC:
3.61E+12
MPN:
Condition:
New
[Us] Rated Supply Voltage:
115...480 V
Mounting Holes Diameter:
14 mm
Nominal Output Power:
4450 W 115 V single phase || 7790 W 230 V single phase || 10620 W 400 V three phase || 10100 W 480 V three phase
Rotor Inertia:
206 kg.cm²
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Torque Constant:
2.76 N.m/A 120 °C
Mounting Support:
international standard flange
Pvc Free:
Yes
Nominal Torque:
84.9 N.m 115 V single phase || 74.4 N.m 230 V single phase || 50.7 N.m 400 V three phase || 40.2 N.m 480 V three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
70.6 kg
Warranty:
18 months
Peak Stall Torque:
330 N.m 115...480 V three phase
Number Of Motor Poles:
5
Motor Flange Size:
205 mm
Continuous Stall Torque:
94.4 N.m 115...480 V three phase
Device Short Name:
SH3.....P
Centring Collar Depth:
4 mm
Rohs Exemption Information:
Yes
Maximum Current Irms:
136.1 A
Centring Collar Diameter:
180 mm
Circle Diameter Of The Mounting Holes:
215 mm
Mercury Free:
Yes
Product Or Component Type:
servo motor
Speed Feedback Resolution:
128 periods
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Resistance:
0.2 Ohm
Holding Brake:
with
Phase:
three phase
Maximum Axial Force Fa:
740 N
Environmental Disclosure:
ENVPEP111049EN
Length:
538.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Mechanical Speed:
3800 rpm
Number Of Mounting Holes:
4
Shaft Length:
80 mm
Back Emf Constant:
172 V/krpm 20 °C
Encoder Type:
absolute multiturn SinCos Hiperface
Sustainable Offer Status:
Green Premium product
Maximum Radial Force Fr:
4500 N 1000 rpm || 3570 N 2000 rpm || 3120 N 3000 rpm
Continuous Stall Current:
33.2 A
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
