Schneider Electric SH32053P12F1000 Sh3 Motor 205.3 Key Mlt Brk Str Ip54
SKU:
SH32053P12F1000
UPC:
3.60648E+12
MPN:
Condition:
New
Mounting Holes Diameter:
14 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
70.6 kg
Back Emf Constant:
172 V/krpm 20 °C
Number Of Motor Poles:
5
Electrical Connection:
rotatable right angled connector
Centring Collar Depth:
4 mm
Maximum Current Irms:
136.1 A
Encoder Type:
absolute multiturn SinCos Hiperface
Phase:
three phase
Motor Flange Size:
205 mm
Peak Stall Torque:
330 N.m 115...480 V three phase
Maximum Radial Force Fr:
4500 N 1000 rpm || 3570 N 2000 rpm || 3120 N 3000 rpm
Key Width:
10 mm
Warranty:
18 months
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Type Of Cooling:
natural convection
Device Short Name:
SH3.....P
Pvc Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Stator Inductance:
6.3 mH
Length:
538.5 mm
Nominal Output Power:
4450 W 115 V single phase || 7790 W 230 V single phase || 10620 W 400 V three phase || 10100 W 480 V three phase
Sustainable Offer Status:
Green Premium product
Stator Resistance:
0.2 Ohm
Nominal Torque:
84.9 N.m 115 V single phase || 74.4 N.m 230 V single phase || 50.7 N.m 400 V three phase || 40.2 N.m 480 V three phase
Circularity Profile:
N/A
Maximum Axial Force Fa:
740 N
Holding Brake:
with
Maximum Mechanical Speed:
3800 rpm
Shaft Length:
80 mm
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Circle Diameter Of The Mounting Holes:
215 mm
Shaft End:
parallel key
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Centring Collar Diameter:
180 mm
Continuous Power:
10600 W
Continuous Stall Torque:
94.4 N.m 115...480 V three phase
Range Compatibility:
PacDrive 3
Torque Constant:
2.76 N.m/A 120 °C
Speed Feedback Resolution:
128 periods
Holding Torque:
80 N.m
Environmental Disclosure:
ENVPEP111049EN
Number Of Mounting Holes:
4
Rotor Inertia:
206 kg.cm²
Continuous Stall Current:
33.2 A
[Us] Rated Supply Voltage:
115...480 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
