Schneider Electric SSD1A320BDC2 Solid State Relay-Din Rail, Single Phase
Schneider Electric
$76.00
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This solid state DIN rail mounted relay belongs to the Schneider Electric Harmony solid state relays range. This electrical relay mounts on 35mm DIN rail and comes with a secure mounting latch. This is a 20A power rated relay with pluggable screw input contactor type configuration and Zero voltage switching. This single-phase relay has a IP20 built-in heat sink and a built-in transient overvoltage protection. It is controlled with a 4Vdc to 32Vdc input, has a rated load voltage of 48Vac to 600Vac. It also has a LED input voltage status indicator and clip-in legend for easy identification. It weighs 0.301Kg and its dimensions are, 22.5mm wide, 133.8mm deep, 91.9mm high. It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. This relay conforms to international standards like EN/IEC 60068, IEC 61373, UL 508, CSA C22.2 No 14-13 and certifications like UL and CSA. Besides the existing standard screw connection for input and output, SSD provides more wiring options like the spring or screw pluggable input connectors, and telescopic or clamp cage output terminals.
- Output Switching Mode:
- zero voltage switching
- Number Of Channels:
- 1
- Power Factor:
- 0.5 with maximum load
- Environmental Disclosure:
- ENVPEP1508007EN
- Range Of Product:
- Harmony Solid State Relays
- Maximum Leakage Current:
- 1 mA off-state
- Coordination Type:
- type 1 || type 2
- Net Weight:
- 0.301 kg
- Shock Resistance:
- 50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 || 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Input Current Limits:
- 10-15 mA
- Output Voltage:
- 48...600 V AC
- Tightening Torque:
- 0.5 N.m for control input || 5 lb.in for control input || 2...2.2 N.m for load output || 18...20 lb.in for load output
- Height:
- 91.9 mm
- [Uc] Control Circuit Voltage:
- 4...32 V DC
- Connections - Terminals:
- plug-inscrew terminals, clamping connection capacity:0.08...3.30 mm², AWG 28...AWG 12 for input || telescopic screw, clamping connection capacity:0.75...10 mm², AWG 20...AWG 8 for output
- Flame Retardance:
- V-0 conforming to UL 94
- Maximum Voltage Drop:
- <1.3 V on-state
- Phase:
- 1 phase
- Mercury Free:
- Yes
- Mounting Support:
- 35 mm symmetrical DIN rail conforming to IEC 60715
- Contact Form:
- Form 5 semiconductor output DOL contactor
- Absolute Maximum Voltage:
- 1200 V
- Minimum Switching Voltage:
- 4 V DC turn-on
- Ambient Air Temperature For Storage:
- -40-100 °C
- Response Time:
- 0.5 cycle (turn-on) || 0.5 cycle (turn-off)
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Line Rated Current:
- 20 A
- Rated Duty:
- uninterrupted
- Depth:
- 133.8 mm
- Maximum Switching Voltage:
- 1 V DC turn-off
- Overvoltage Category:
- III
- Sustainable Offer Status:
- Green Premium product
- Dv/Dt:
- 500 V/µs off-state at maximum rated voltage
- Local Signalling:
- for control voltage LED (green)
- Device Presentation:
- complete product
- Width:
- 22.5 mm
- Ip Degree Of Protection:
- IP20
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Pollution Degree:
- 2
- Device Short Name:
- SSD1
- Maximum I²T For Fusing:
- 409 A².s for 10 ms || 375 A².s for 8.33 ms
- China Rohs Regulation:
- X
- Insulation Resistance:
- 1000 MOhm at 500 V DC
- Dielectric Strength:
- 4 kV AC for input/output circuit || 4 kV AC for input or output to case
- Motor Power Kw:
- 0.37 kW/0.5 hp at 120 V AC || 1.12 kW/1.5 hp at 240 V AC || 2.24 kW/3 hp at 480 V AC
- Product Configuration Type:
- contactor configuration with pluggable screw input
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Solid State Output Type:
- zero voltage switching
- Rohs Exemption Information:
- Yes
- Electromagnetic Compatibility:
- electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 || electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 || conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming
- Circularity Profile:
- ENVEOLI1508007EN
- Ambient Air Temperature For Operation:
- -40-80 °C
- Load Current:
- 0.1-20 A
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV for input/output circuit || 6 kV for input or output to case
- Inrush Current:
- 300 A at 60 Hz
- Product Or Component Type:
- solid state relay up to 20 A
- Standards:
- IEC 61373:class B: category 1 || IEC 60947-4-3 || IEC 62314 || IEC 60950-1 || CSA C22.2 No 14-13 || UL 508
- Vibration Resistance:
- 0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6
- Network Frequency:
- 47...440 Hz
- Catalog:
- View
- Datasheet:
- View
